Difference between revisions of "Ecoplus TS-20 Drill Press"
From Fab Lab Bcn WIKI
| (5 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
[[Category:Hand tools]] | [[Category:Hand tools]] | ||
| + | __NOTOC__ | ||
| + | [[File:Ecoplus-TS-20-p59.png| thumb |Ecoplus TS-20 Drill Press]] | ||
| − | + | '''Description''': | |
| + | |||
| + | A drill press is a style of drill that may be mounted on a stand or bolted to the floor or workbench. | ||
| + | |||
| + | Major components include a base, column (or pillar), adjustable table, spindle, chuck, and drill head, usually driven by an electric motor. The head has a set of three handles radiating from a central hub that are turned to move the spindle and chuck vertically. | ||
| + | |||
| + | ==Safety== | ||
| + | *Always wear safety glasses and if you are drilling metal, additional gloves and mask are required. | ||
| + | *The rotation of the drill bit may try to spin the wood or metal workpiece, so ensure it is clamped securely to the worktable. | ||
| + | |||
| + | ==How to use== | ||
| + | |||
| + | *Tool to drill wood, metal and plastic | ||
| + | |||
| + | *One speed. You don't need to set the speed. | ||
| + | |||
| + | *Fit the bit. Open the chuck, slide in the bit, snug the chuck by hand around the shaft of the bit, then tighten. | ||
| + | |||
| + | *Adjust the table. Release the clamping lever on the back of the platform and turn the crank on the right side to adjust the table height. | ||
| + | |||
| + | *Gauging the depth. | ||
| + | |||
| + | *Secure the workpiece with clamps | ||
| + | |||
| + | *Drill | ||
| + | |||
| + | *Drilling. | ||
| + | |||
| + | ==Advantages== | ||
| + | |||
| + | A drill press has a number of advantages over a hand-held drill: | ||
| + | |||
| + | *Less effort is required to apply the drill to the workpiece. | ||
| + | *The movement of the chuck and spindle is by a lever working on a rack and pinion, which gives the operator considerable mechanical advantage. | ||
| + | *The table allows a vise or clamp to be used to position and restrain the work, making the operation much more secure and accurate. | ||
| + | *The angle of the spindle is fixed relative to the table, allowing holes to be drilled accurately and consistently. | ||
| + | *Drill presses are almost always equipped with more powerful motors compared to hand-held drills. This enables larger drill bits to be used and also speeds up drilling with smaller bits. | ||
| + | |||
| + | ==External link== | ||
| + | |||
| + | https://www.bricolandia.es/belflex-taladro-de-sobremesa-ep-ts-20-44174000/ | ||
Latest revision as of 10:42, 27 April 2020
Description:
A drill press is a style of drill that may be mounted on a stand or bolted to the floor or workbench.
Major components include a base, column (or pillar), adjustable table, spindle, chuck, and drill head, usually driven by an electric motor. The head has a set of three handles radiating from a central hub that are turned to move the spindle and chuck vertically.
Safety
- Always wear safety glasses and if you are drilling metal, additional gloves and mask are required.
- The rotation of the drill bit may try to spin the wood or metal workpiece, so ensure it is clamped securely to the worktable.
How to use
- Tool to drill wood, metal and plastic
- One speed. You don't need to set the speed.
- Fit the bit. Open the chuck, slide in the bit, snug the chuck by hand around the shaft of the bit, then tighten.
- Adjust the table. Release the clamping lever on the back of the platform and turn the crank on the right side to adjust the table height.
- Gauging the depth.
- Secure the workpiece with clamps
- Drill
- Drilling.
Advantages
A drill press has a number of advantages over a hand-held drill:
- Less effort is required to apply the drill to the workpiece.
- The movement of the chuck and spindle is by a lever working on a rack and pinion, which gives the operator considerable mechanical advantage.
- The table allows a vise or clamp to be used to position and restrain the work, making the operation much more secure and accurate.
- The angle of the spindle is fixed relative to the table, allowing holes to be drilled accurately and consistently.
- Drill presses are almost always equipped with more powerful motors compared to hand-held drills. This enables larger drill bits to be used and also speeds up drilling with smaller bits.
External link
https://www.bricolandia.es/belflex-taladro-de-sobremesa-ep-ts-20-44174000/
