Difference between revisions of "Bosch GEX 150 AC Orbit Sander"
From Fab Lab Bcn WIKI
| (One intermediate revision by one user not shown) | |||
| Line 1: | Line 1: | ||
[[Category:Hand tools]] | [[Category:Hand tools]] | ||
| − | + | __NOTOC__ | |
[[File:Bosch_GEX_150_AC_Orbit_Sander.png| thumb |Bosch GEX 150 AC Orbit Sander]] | [[File:Bosch_GEX_150_AC_Orbit_Sander.png| thumb |Bosch GEX 150 AC Orbit Sander]] | ||
| − | + | '''Description''': | |
| + | |||
| + | The orbital sander allows for smooth, scratch free finish on planar wood boards. | ||
| + | |||
| + | It is simply a sander that moves the sanding media in a circle (spinning it) while at the same time moving the entire pad in a slightly oval orbit around the center of the sanders' z-axis. Simply put the sander keeps the sanding particles from making contact with the same section of wood over and over, resulting in a more uniform finish. | ||
| + | |||
| + | ==Safety== | ||
| + | *Always wear a mask along with safety goggles. | ||
| + | *When you turn on the machine, keep it away from the surface. | ||
| + | *When you turn off the machine, let it come to a complete stop before placing it on a surface. | ||
==How to use== | ==How to use== | ||
| − | *Good finishing | + | *Before you begin sanding, make sure the disk of the sander has proper sandpaper attached and with the ideal grain. |
| − | * | + | *Check that the sandpaper already on the sander still has grit; if it is too worn down, replace it before sanding. |
| − | *Only for flat surfaces | + | *As usual, make sure that the material you are sanding is properly secured with a vice or clamp to a table. |
| + | *When you turn the sander on, make sure you let it spin up to full speed before making contact with the material. | ||
| + | *Don't press down on the sander. The weight of the sander and your arm will cause enough pressure to get the job done. | ||
| + | *Cover all rough surfaces of the material until the edges have been thoroughly smoothed and you have removed all splinters. | ||
| + | *Lift the sander off of the material before allowing it to slow down/turn off. | ||
| + | |||
| + | ==Features== | ||
| + | |||
| + | *Good finishing | ||
| + | *Removes large marks on the wood | ||
| + | *Only suitable for flat surfaces | ||
*Random movement | *Random movement | ||
| − | *Not good for | + | *Not good for sanding edges as it can be too powerful |
| − | + | ||
Latest revision as of 10:57, 27 April 2020
Description:
The orbital sander allows for smooth, scratch free finish on planar wood boards.
It is simply a sander that moves the sanding media in a circle (spinning it) while at the same time moving the entire pad in a slightly oval orbit around the center of the sanders' z-axis. Simply put the sander keeps the sanding particles from making contact with the same section of wood over and over, resulting in a more uniform finish.
Safety
- Always wear a mask along with safety goggles.
- When you turn on the machine, keep it away from the surface.
- When you turn off the machine, let it come to a complete stop before placing it on a surface.
How to use
- Before you begin sanding, make sure the disk of the sander has proper sandpaper attached and with the ideal grain.
- Check that the sandpaper already on the sander still has grit; if it is too worn down, replace it before sanding.
- As usual, make sure that the material you are sanding is properly secured with a vice or clamp to a table.
- When you turn the sander on, make sure you let it spin up to full speed before making contact with the material.
- Don't press down on the sander. The weight of the sander and your arm will cause enough pressure to get the job done.
- Cover all rough surfaces of the material until the edges have been thoroughly smoothed and you have removed all splinters.
- Lift the sander off of the material before allowing it to slow down/turn off.
Features
- Good finishing
- Removes large marks on the wood
- Only suitable for flat surfaces
- Random movement
- Not good for sanding edges as it can be too powerful
External link
http://www.bosch-professional.com/qa/en/random-orbit-sander-gex-150-ac-131479-0601372771.html
