Difference between revisions of "Epilog Laser Cutter"

Revision as of 15:50, 29 November 2010

Properties:

Polipropileno / Polypropylene 0.5mm:

CUT: Speed: 60% Power: 40%

ENGRAVE: Speed: 90% Power: 15%

Polipropileno / Polypropylene 0.8mm:

CUT: Speed: 60% Power: 70%

Papel / Paper (thicker)

CUT: Speed: 60% Power: 30%

Papel / Paper (shine 1 side)

CUT: Speed: 60% Power: 25%

ENGRAVE: Speed: 95% Power: 4%

Papel transparente / Transparent Paper

CUT: Speed: 75% Power: 20%

Madera/ Plywood 3mm:

CUT: Speed: 15% Power: 45%

ENGRAVE: Speed: 40% Power: 10%

Fieltro / Felt (white) 3mm:

CUT: Speed: 60% (70%) Power: 30%

Fieltro / Felt (color) 1mm:

CUT: Speed: 90% (70%) Power: 10%

Plexiglass 3mm:

CUT: Speed:15% Power: 60%