Difference between revisions of "Epilog Laser Cutter"
From Fab Lab Bcn WIKI
(→Properties) |
(→Properties) |
||
| Line 4: | Line 4: | ||
===Polipropileno / Polypropylene 0.5mm:=== | ===Polipropileno / Polypropylene 0.5mm:=== | ||
| − | |||
CUT: | CUT: | ||
*Speed: 60% | *Speed: 60% | ||
*Power: 40% | *Power: 40% | ||
| − | |||
ENGRAVE: | ENGRAVE: | ||
*Speed: 90% | *Speed: 90% | ||
*Power: 15% | *Power: 15% | ||
| − | |||
===Polipropileno / Polypropylene 0.8mm:=== | ===Polipropileno / Polypropylene 0.8mm:=== | ||
| − | |||
CUT: | CUT: | ||
*Speed: 60% | *Speed: 60% | ||
*Power: 70% | *Power: 70% | ||
| − | |||
===Papel / Paper (thicker)=== | ===Papel / Paper (thicker)=== | ||
| − | |||
CUT: | CUT: | ||
*Speed: 60% | *Speed: 60% | ||
*Power: 30% | *Power: 30% | ||
| − | |||
===Papel / Paper (shine 1 side)=== | ===Papel / Paper (shine 1 side)=== | ||
| − | |||
CUT: | CUT: | ||
*Speed: 60% | *Speed: 60% | ||
*Power: 25% | *Power: 25% | ||
| − | |||
ENGRAVE: | ENGRAVE: | ||
*Speed: 95% | *Speed: 95% | ||
*Power: 4% | *Power: 4% | ||
| − | |||
===Papel transparente / Transparent Paper=== | ===Papel transparente / Transparent Paper=== | ||
| − | |||
CUT: | CUT: | ||
*Speed: 75% | *Speed: 75% | ||
*Power: 20% | *Power: 20% | ||
| − | |||
===Madera/ Plywood 3mm=== | ===Madera/ Plywood 3mm=== | ||
| − | |||
CUT: | CUT: | ||
*Speed: 15% | *Speed: 15% | ||
*Power: 45% | *Power: 45% | ||
| − | |||
ENGRAVE: | ENGRAVE: | ||
*Speed: 40% | *Speed: 40% | ||
*Power: 10% | *Power: 10% | ||
| − | |||
===Fieltro / Felt (white) 3mm=== | ===Fieltro / Felt (white) 3mm=== | ||
| − | |||
CUT: | CUT: | ||
Speed: 60% (70%) | Speed: 60% (70%) | ||
Power: 30% | Power: 30% | ||
| − | |||
===Fieltro / Felt (color) 1mm=== | ===Fieltro / Felt (color) 1mm=== | ||
| − | |||
CUT: | CUT: | ||
Speed: 90% (70%) | Speed: 90% (70%) | ||
Power: 10% | Power: 10% | ||
| − | |||
| − | |||
===Plexiglass 3mm=== | ===Plexiglass 3mm=== | ||
| − | |||
CUT: | CUT: | ||
Speed:15% | Speed:15% | ||
Power: 60% | Power: 60% | ||
Revision as of 23:47, 28 February 2011
Contents
Properties
Polipropileno / Polypropylene 0.5mm:
CUT:
- Speed: 60%
- Power: 40%
ENGRAVE:
- Speed: 90%
- Power: 15%
Polipropileno / Polypropylene 0.8mm:
CUT:
- Speed: 60%
- Power: 70%
Papel / Paper (thicker)
CUT:
- Speed: 60%
- Power: 30%
Papel / Paper (shine 1 side)
CUT:
- Speed: 60%
- Power: 25%
ENGRAVE:
- Speed: 95%
- Power: 4%
Papel transparente / Transparent Paper
CUT:
- Speed: 75%
- Power: 20%
Madera/ Plywood 3mm
CUT:
- Speed: 15%
- Power: 45%
ENGRAVE:
- Speed: 40%
- Power: 10%
Fieltro / Felt (white) 3mm
CUT: Speed: 60% (70%) Power: 30%
Fieltro / Felt (color) 1mm
CUT: Speed: 90% (70%) Power: 10%
Plexiglass 3mm
CUT: Speed:15% Power: 60%
