Difference between revisions of "Epilog Laser Cutter"
From Fab Lab Bcn WIKI
(→Properties) |
(→Cardboard Corrugated 5mm (2 layers)) |
||
| Line 59: | Line 59: | ||
===Cardboard Corrugated 5mm (2 layers)=== | ===Cardboard Corrugated 5mm (2 layers)=== | ||
CUT: | CUT: | ||
| − | *Speed: | + | *Speed:55% |
| − | *Power: | + | *Power: 45% |
| − | + | ||
| − | + | ||
| − | + | ||
Revision as of 16:50, 13 July 2011
Contents
- 1 Properties
- 1.1 Polipropileno / Polypropylene 0.5mm:
- 1.2 Polipropileno / Polypropylene 0.8mm:
- 1.3 Papel / Paper (thicker)
- 1.4 Papel / Paper (shine 1 side)
- 1.5 Papel transparente / Transparent Paper
- 1.6 Madera/ Plywood 3mm
- 1.7 Fieltro / Felt (white) 3mm
- 1.8 Fieltro / Felt (color) 1mm
- 1.9 Plexiglass 3mm
- 1.10 Cardboard Corrugated 5mm (2 layers)
Properties
Polipropileno / Polypropylene 0.5mm:
CUT:
- Speed: 60%
- Power: 40%
ENGRAVE:
- Speed: 90%
- Power: 15%
Polipropileno / Polypropylene 0.8mm:
CUT:
- Speed: 60%
- Power: 70%
Papel / Paper (thicker)
CUT:
- Speed: 60%
- Power: 30%
Papel / Paper (shine 1 side)
CUT:
- Speed: 60%
- Power: 25%
ENGRAVE:
- Speed: 95%
- Power: 4%
Papel transparente / Transparent Paper
CUT:
- Speed: 75%
- Power: 20%
Madera/ Plywood 3mm
CUT:
- Speed: 15%
- Power: 45%
ENGRAVE:
- Speed: 40%
- Power: 10%
Fieltro / Felt (white) 3mm
CUT:
- Speed: 60% (70%)
- Power: 30%
Fieltro / Felt (color) 1mm
CUT:
- Speed: 90% (70%)
- Power: 10%
Plexiglass 3mm
CUT:
- Speed:15%
- Power: 60%
Cardboard Corrugated 5mm (2 layers)
CUT:
- Speed:55%
- Power: 45%
