Difference between revisions of "CNC Control"

From Fab Lab Bcn WIKI

Jump to: navigation, search

Revision as of 17:45, 26 October 2017

This page is about resources for building computer controlled machines: Milling machines, Laser Cutters, FDM 3D Printers, etc..

Contents

1 Resources
2 Milling
3 Milling machines
4 Milling Path
- 4.1 Laser cutting
5 Laser cutting machines
6 Laser cutting Path

Resources

CBA Motion Control Resources http://fab.cba.mit.edu/classes/S62.12/motion_control.html

Milling

Milling machines

Milling Path

Laser cutting

Laser cutting machines

Laser cutting Path

Firmware

GRBL - CNC Controller firmwares for Arduino

http://dank.bengler.no/-/page/show/5470_grbl

TinyG - All-in-one solution (software and hardware) forked from the GRBL project

https://www.synthetos.com/wiki/index.php?title=Projects:TinyG

All in-one Boards

ARM base http://smoothieware.org/
ARM base http://www.3dprinting-r2c2.com/?q=content/r2c2-documentation
ArduinoMEGA based http://reprap.org/wiki/RAMBo
https://github.com/synthetos/TinyG/wiki

Motor Drivers

Motor Drivers IC's by Allegro

http://www.allegromicro.com/en/Products/Categories/ICs/motor.asp

Motor Drivers Solutions by Geckodrive

http://www.geckodrive.com/categories.html

Stepper Drivers by Allegro IC's

Arduino Shields for driving CNC's

http://www.synthetos.com/wiki/index.php?title=Projects:grblShield is designed to work with the GRBL arduino firmware http://dank.bengler.no/-/page/show/5470_grbl

Standalone USB 2 channels stepper driver (based on the TI DRV8811)

http://www.sparkfun.com/products/10025

Stepper Driver boards based on the Allegro 3982 / 3977

Motors

Stepper motor
Stepper Motors (up to NEMA 34) http://www.linengineering.com/line/contents/stepmotors/

Interesting Projects

Retrieved from "https://wiki.fablabbcn.org/index.php?title=CNC_Control&oldid=8317"