Difference between revisions of "Epilog Laser Cutter"
From Fab Lab Bcn WIKI
| Line 4: | Line 4: | ||
| − | Polipropileno / Polypropylene 0.5mm: | + | '''Polipropileno / Polypropylene 0.5mm:''' |
CUT: | CUT: | ||
| Line 15: | Line 15: | ||
| − | Polipropileno / Polypropylene 0.8mm: | + | '''Polipropileno / Polypropylene 0.8mm:''' |
CUT: | CUT: | ||
| Line 22: | Line 22: | ||
| − | Papel / Paper (thicker) | + | '''Papel / Paper (thicker)''' |
CUT: | CUT: | ||
| Line 29: | Line 29: | ||
| − | Papel / Paper (shine 1 side) | + | '''Papel / Paper (shine 1 side)''' |
CUT: | CUT: | ||
| Line 40: | Line 40: | ||
| − | Papel transparente / Transparent Paper | + | '''Papel transparente / Transparent Paper''' |
CUT: | CUT: | ||
| Line 47: | Line 47: | ||
| − | Madera/ Plywood 3mm: | + | '''Madera/ Plywood 3mm:''' |
CUT: | CUT: | ||
| Line 58: | Line 58: | ||
| − | Fieltro / Felt (white) 3mm: | + | '''Fieltro / Felt (white) 3mm:''' |
CUT: | CUT: | ||
| Line 65: | Line 65: | ||
| − | Fieltro / Felt (color) 1mm: | + | '''Fieltro / Felt (color) 1mm:''' |
CUT: | CUT: | ||
| Line 71: | Line 71: | ||
Power: 10% | Power: 10% | ||
| − | + | ''' | |
| − | Plexiglass 3mm: | + | Plexiglass 3mm:''' |
CUT: | CUT: | ||
Speed:15% | Speed:15% | ||
Power: 60% | Power: 60% | ||
Revision as of 15:51, 29 November 2010
Properties:
Polipropileno / Polypropylene 0.5mm:
CUT: Speed: 60% Power: 40%
ENGRAVE: Speed: 90% Power: 15%
Polipropileno / Polypropylene 0.8mm:
CUT: Speed: 60% Power: 70%
Papel / Paper (thicker)
CUT: Speed: 60% Power: 30%
Papel / Paper (shine 1 side)
CUT: Speed: 60% Power: 25%
ENGRAVE: Speed: 95% Power: 4%
Papel transparente / Transparent Paper
CUT: Speed: 75% Power: 20%
Madera/ Plywood 3mm:
CUT: Speed: 15% Power: 45%
ENGRAVE: Speed: 40% Power: 10%
Fieltro / Felt (white) 3mm:
CUT: Speed: 60% (70%) Power: 30%
Fieltro / Felt (color) 1mm:
CUT: Speed: 90% (70%) Power: 10%
Plexiglass 3mm:
CUT: Speed:15% Power: 60%
