Difference between revisions of "Epilog Laser Cutter"
From Fab Lab Bcn WIKI
(→Properties) |
|||
| Line 3: | Line 3: | ||
== Properties == | == Properties == | ||
| − | + | ===Polipropileno / Polypropylene 0.5mm:=== | |
CUT: | CUT: | ||
| − | Speed: 60% | + | *Speed: 60% |
| − | Power: 40% | + | *Power: 40% |
ENGRAVE: | ENGRAVE: | ||
| − | Speed: 90% | + | *Speed: 90% |
| − | Power: 15% | + | *Power: 15% |
| − | + | ===Polipropileno / Polypropylene 0.8mm:=== | |
CUT: | CUT: | ||
| − | Speed: 60% | + | *Speed: 60% |
| − | Power: 70% | + | *Power: 70% |
| − | + | ===Papel / Paper (thicker)=== | |
CUT: | CUT: | ||
| − | Speed: 60% | + | *Speed: 60% |
| − | Power: 30% | + | *Power: 30% |
| − | + | ===Papel / Paper (shine 1 side)=== | |
CUT: | CUT: | ||
| − | Speed: 60% | + | *Speed: 60% |
| − | Power: 25% | + | *Power: 25% |
ENGRAVE: | ENGRAVE: | ||
| − | Speed: 95% | + | *Speed: 95% |
| − | Power: 4% | + | *Power: 4% |
| − | + | ===Papel transparente / Transparent Paper=== | |
CUT: | CUT: | ||
| − | Speed: 75% | + | *Speed: 75% |
| − | Power: 20% | + | *Power: 20% |
| − | + | ===Madera/ Plywood 3mm=== | |
CUT: | CUT: | ||
| − | Speed: 15% | + | *Speed: 15% |
| − | Power: 45% | + | *Power: 45% |
ENGRAVE: | ENGRAVE: | ||
| − | Speed: 40% | + | *Speed: 40% |
| − | Power: 10% | + | *Power: 10% |
| − | + | ===Fieltro / Felt (white) 3mm=== | |
CUT: | CUT: | ||
| Line 64: | Line 64: | ||
| − | + | ===Fieltro / Felt (color) 1mm=== | |
CUT: | CUT: | ||
| Line 72: | Line 72: | ||
| − | + | ===Plexiglass 3mm=== | |
CUT: | CUT: | ||
Speed:15% | Speed:15% | ||
Power: 60% | Power: 60% | ||
Revision as of 23:45, 28 February 2011
Contents
Properties
Polipropileno / Polypropylene 0.5mm:
CUT:
- Speed: 60%
- Power: 40%
ENGRAVE:
- Speed: 90%
- Power: 15%
Polipropileno / Polypropylene 0.8mm:
CUT:
- Speed: 60%
- Power: 70%
Papel / Paper (thicker)
CUT:
- Speed: 60%
- Power: 30%
Papel / Paper (shine 1 side)
CUT:
- Speed: 60%
- Power: 25%
ENGRAVE:
- Speed: 95%
- Power: 4%
Papel transparente / Transparent Paper
CUT:
- Speed: 75%
- Power: 20%
Madera/ Plywood 3mm
CUT:
- Speed: 15%
- Power: 45%
ENGRAVE:
- Speed: 40%
- Power: 10%
Fieltro / Felt (white) 3mm
CUT: Speed: 60% (70%) Power: 30%
Fieltro / Felt (color) 1mm
CUT: Speed: 90% (70%) Power: 10%
Plexiglass 3mm
CUT: Speed:15% Power: 60%
