Epilog Laser Cutter
From Fab Lab Bcn WIKI
Revision as of 15:51, 29 November 2010 by 91.126.132.2 (Talk)
Properties:
Polipropileno / Polypropylene 0.5mm:
CUT: Speed: 60% Power: 40%
ENGRAVE: Speed: 90% Power: 15%
Polipropileno / Polypropylene 0.8mm:
CUT: Speed: 60% Power: 70%
Papel / Paper (thicker)
CUT: Speed: 60% Power: 30%
Papel / Paper (shine 1 side)
CUT: Speed: 60% Power: 25%
ENGRAVE: Speed: 95% Power: 4%
Papel transparente / Transparent Paper
CUT: Speed: 75% Power: 20%
Madera/ Plywood 3mm:
CUT: Speed: 15% Power: 45%
ENGRAVE: Speed: 40% Power: 10%
Fieltro / Felt (white) 3mm:
CUT: Speed: 60% (70%) Power: 30%
Fieltro / Felt (color) 1mm:
CUT: Speed: 90% (70%) Power: 10%
Plexiglass 3mm:
CUT: Speed:15% Power: 60%