Ecoplus TS-20 Drill Press

Ecoplus TS-20 Drill Press

Ecoplus TS-20 Drill Press

How to use

• Use always glasses and if you're drilling metal, gloves are required

• Tool to drill wood, metal and plastic

• One speed. You don't need to set the speed.

• Fit the Bit. Open the chuck, slide in the bit, snug the chuck by hand around the bit’s shaft, then tighten.

• Adjust the Table. Release the clamping lever on the back of the platform and turn the crank on the right side to adjust the table height.

• Gauging the Depth.

• Secure the Workpiece. The ro­tation of the drill bit may try to spin the wood or metal workpiece, so it must be clamped to the worktable.

• Drilling.

Advantages

A drill press has a number of advantages over a hand-held drill:

• Less effort is required to apply the drill to the workpiece.
• The movement of the chuck and spindle is by a lever working on a rack and pinion, which gives the operator considerable mechanical advantage
• The table allows a vise or clamp to be used to position and restrain the work, making the operation much more secure
• The angle of the spindle is fixed relative to the table, allowing holes to be drilled accurately and consistently
• Drill presses are almost always equipped with more powerful motors compared to hand-held drills. This enables larger drill bits to be used and also speeds up drilling with smaller bits.

External link

https://www.bricolandia.es/belflex-taladro-de-sobremesa-ep-ts-20-44174000/