Difference between revisions of "6 Axis Robotic Arm"

From Fab Lab Bcn WIKI
Jump to: navigation, search
(Turn on the machine)
Line 24: Line 24:
 
*On the Teach Pendant press the window selection key to switch the selection to the command status window
 
*On the Teach Pendant press the window selection key to switch the selection to the command status window
 
*Use the soft keys to acknowledge the status
 
*Use the soft keys to acknowledge the status
 +
  
 
==Robotic Processes==
 
==Robotic Processes==

Revision as of 14:17, 26 August 2016

The original Makerbot Cupcake built at Fab Lab Barcelona in 2010

Technical specifications

Brand:

  • Kuka Robots

Model:

  • KR 150 L110–2

Media:Image (laser5).png


Machine workflow

Turn on the machine

  • Turn on the air compressor (if working with gripper or spindle)
  • Turn on the Kuka box for electronic switches
  • Turn on the Kuka controller KRC2 with the black handle
  • Wait that the operative system Windows XP turns on
  • Press the two buttons on the box attached to the entrance door; first "rearme", then "peticion"
  • On the Teach Pendant press the window selection key to switch the selection to the command status window
  • Use the soft keys to acknowledge the status


Robotic Processes

List of processes already tested with the KUKA at IAAC (by order of feasibility and accessibility) :

  • Light Writing,
  • Pen Writing
  • Clay Engraving
  • Bot&Dolly Camera
  • 3D Scan (that can be combined with any other process for a slow material feedback loop)
  • Pick & Place
  • Wire / rope / fibre weaving
  • Spraying (paint, glue, fibre, sand, mud, clay)
  • Hot Wire Cutting. (EPS foam)
  • 7D Milling. (foam, plaster, wood,....)
  • 7D Chain-saw
  • 3D printing (plastic, clay, hydrogel...)
  • Reverse Milling (to be combined with Pick&Place application).
  • Real Time Interaction (to be combined with any other process, need RSI)

List of video of IAAC projects using a robot : https://vimeo.com/album/3361210