Difference between revisions of "Bosch GST 150 CE Jigsaw"

From Fab Lab Bcn WIKI
Jump to: navigation, search
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
[[Category:Hand tools]]
 
[[Category:Hand tools]]
 
+
__NOTOC__
 
[[File:Bosch_GST_150_CE.png| thumb |Bosch GST 150 CE Jigsaw]]
 
[[File:Bosch_GST_150_CE.png| thumb |Bosch GST 150 CE Jigsaw]]
  
Line 9: Line 9:
 
Jigsaws are ideal for cutting curves and complex shapes in wood. They also work well for making short crosscuts on a board and finishing inside corner cuts. Jigsaws are not good for making fast, long, straight cuts. Use a circular saw instead.
 
Jigsaws are ideal for cutting curves and complex shapes in wood. They also work well for making short crosscuts on a board and finishing inside corner cuts. Jigsaws are not good for making fast, long, straight cuts. Use a circular saw instead.
  
In the past, what is now usually called scroll saws were often referred to as jigsaws.
+
In the past, what is now usually called scroll saws were often referred to as jigsaws. A power jigsaw may also be referred to, by some manufacturers, as a "bayonet saw" or sabre saw.
A power jigsaw may also be referred to, by some manufacturers, as a "bayonet saw" or sabre saw.
+
 
 +
==Safety==
 +
*Always use safety glasses.
 +
*Make sure the machine is unplugged before changing the blade and keep it away from the direction of your face.
 +
*Check that the cutting line does not pass over the work table. Otherwise you risk damaging the work table.
 +
*The electric cable must be position on the opposite side of the cutting direction.
  
 
==How to use==
 
==How to use==
  
*Used for free shapes
+
*Used for free shapes.
*Choose the right blade. Depending on the material, the thickness and the maximum angle of the cutting curve
+
*Choose the right blade according to the material, the thickness and the maximum angle of the cutting curve.
*The blade have to be at least 1 cm longer than the thickness of material
+
*The blade have to be at least 1 cm longer than the thickness of material.
*Don’t change the T shape blade in direction of your face, lie down the tool and change the blade
+
*Don’t change the T-shape blade with it directed at your face. Lie the tool down onto the worktable and proceed to change the blade.
 
*Use a fence for perfectly straight cuts. Hold the workpiece and the fence firmly with clamps.  
 
*Use a fence for perfectly straight cuts. Hold the workpiece and the fence firmly with clamps.  
 
*Avoid driving blades into the bench top.
 
*Avoid driving blades into the bench top.
*With hardwood use slow speed (to much friction can burn the material)
+
*With hardwood use slower speeds (to much friction can burn the material).
*With softwood can use fast speed
+
*With softwood can use faster speeds.
 
[[File:Mode_Jig_Saw.png]]
 
[[File:Mode_Jig_Saw.png]]
  
 
==Blades==
 
==Blades==
 
[[File:Jig_Saw_Blades.png]]
 
[[File:Jig_Saw_Blades.png]]
==Safety==
 
*Use always safety glasses
 
*Change the blade with the machine umplugged and not in direction of your face.
 
*Check that the cutting line does not pass over the work table.(don't hit the table with the blade)
 
*The electric cable must extend on the opposite side of the cutting direction
 
 
 
==External link==
 
==External link==
  
 
https://shop.bosch-professional.com/gb/en/product/jigsaw-gst-150-ce--23293
 
https://shop.bosch-professional.com/gb/en/product/jigsaw-gst-150-ce--23293

Latest revision as of 10:49, 27 April 2020

Bosch GST 150 CE Jigsaw

Description:

A jigsaw power tool is a jigsaw made up of an electric motor and a reciprocating saw blade.

Jigsaws are ideal for cutting curves and complex shapes in wood. They also work well for making short crosscuts on a board and finishing inside corner cuts. Jigsaws are not good for making fast, long, straight cuts. Use a circular saw instead.

In the past, what is now usually called scroll saws were often referred to as jigsaws. A power jigsaw may also be referred to, by some manufacturers, as a "bayonet saw" or sabre saw.

Safety

  • Always use safety glasses.
  • Make sure the machine is unplugged before changing the blade and keep it away from the direction of your face.
  • Check that the cutting line does not pass over the work table. Otherwise you risk damaging the work table.
  • The electric cable must be position on the opposite side of the cutting direction.

How to use

  • Used for free shapes.
  • Choose the right blade according to the material, the thickness and the maximum angle of the cutting curve.
  • The blade have to be at least 1 cm longer than the thickness of material.
  • Don’t change the T-shape blade with it directed at your face. Lie the tool down onto the worktable and proceed to change the blade.
  • Use a fence for perfectly straight cuts. Hold the workpiece and the fence firmly with clamps.
  • Avoid driving blades into the bench top.
  • With hardwood use slower speeds (to much friction can burn the material).
  • With softwood can use faster speeds.

Mode Jig Saw.png

Blades

Jig Saw Blades.png

External link

https://shop.bosch-professional.com/gb/en/product/jigsaw-gst-150-ce--23293