Difference between revisions of "Category:Robotic programming"

From Fab Lab Bcn WIKI
Jump to: navigation, search
(Replaced content with "<gallery widths=350 heights=200 style="text-align:center"> File:Kuka_prc_logo.jpg File:Robots logo.jpg </gallery>")
Line 1: Line 1:
Here you can find a very brief overview of robotic programming with KUKA|prc and Robots plugin.
+
<gallery widths=350 heights=200 style="text-align:center">
 
+
File:Kuka_prc_logo.jpg
[[File:Robotic programming.jpg| frame | Programming with KUKA prc plugin in grasshopper, Rhinoceros]]
+
File:Robots logo.jpg
 
+
</gallery>
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
 
+
== Robot Programming with Kuka|prc ==
+
 
+
 
+
[part of the information explained here is coming from: http://mkmra2.blogspot.com/2016/01/robot-programming-with-kukaprc.html]
+
 
+
KUKA|prc is a set of Grasshopper components that provide Procedural Robot Control for KUKA robots (thus the name PRC). These components are very straightforward to use and it's actually quite easy to program the robots using them.
+
 
+
'''Rhino File Setup'''
+
 
+
When you work with the robots using KUKA|prc your units in Rhino must be configured for the Metric system using millimetres. The easiest way to do this is to use the pull-down menus and select File > New... then from the dialogue presented chose "Small Objects - Millimeters" as your template.
+
- Orientation Axes: The other joints (4, 5, 6). These joints are always rotary. Pitch / Roll / Yaw = Orientation Axes. These are the axes closer to the tool.
+
 
+
When installing KUKA|prc has a user interface (UI) much like other Grasshopper plug-ins. The UI consists of the palettes in the KUKA|prc menu.
+
 
+
[[File:kuka prc.jpg]]
+
 
+
There are five palettes which organize the components. These are:
+
 
+
01 | Core: The main Core component is here (discussed below). There are also the components for the motion types (linear, spline, etc.).
+
02 | Virtual Robot: The various KUKA robots are here. We'll mostly be using the KUKA gelis KR6-10 R900 component as those are what are used in the Agilus work cell.
+
03 | Virtual Tools: Approach and Retract components are here (these determine how the robot should move after a toolpath has completed). There are also components for dividing up curves and surfaces and generating robotic motion based on that division.
+
04 | Toolpath Utilities: The tools (end effectors) are here. We'll mostly be using the Custom Tool component. 
+
05 | Utilities: The components dealing with input and outputs are stored here. These will be discussed later.
+
 
+
 
+
'''KUKA|prc CORE'''
+
 
+
The component you always use in every definition is called the Core. It is what generates the KUKA Robot Language (KRL) code that runs on the robot. It also provides the graphical simulation of the robot motion inside Rhino. Everything else gets wired into this component.
+
 
+
[[File:kkuka prc _ Core.jpg]]
+
 
+
The Core component takes five inputs. These are:
+
 
+
SIM- This is a numeric value. Attach a default slider with values from 0.00 to 1.00 to control the simulation.
+
 
+
CMDS- This is the output of one of the KUKA|prc Command components. For example a Linear motion command could be wired into this socket.
+
 
+
TOOL- This is the tool (end effector) to use. It gets wired from one of the Tool components available in the Virtual Tools panel. Usually, you'll use the KUKA|prc Custom Tool option and wire in a Mesh component will show the tool geometry in the simulation. 
+
 
+
ROBOT - This is the robot to use. The code will be generated for this robot and the simulation will graphically depict this robot. You'll wire in one of the robots from the Virtual Robot panel. For the Agilus Workcell, you'll use the Agilus KR6-10 R900 component. 
+
 
+
COLLISION - This is an optional series of meshes that define collision geometry. Enable collision checking in the KUKA|prc settings to make use of this. Note that collision checking has a large, negative impact on KUKA|prc performance.
+
 
+
There are two output as well:
+
 
+
GEO: This is the geometry of the robot at the current position - as a set of meshes. You can right-click on this socket and choose Bake to generate a mesh version of the robot for any position in the simulation. You can use this for renderings for example.
+
 
+
ANALYSIS: This provides a detailed analysis of the simulation values. This has to be enabled for anything to appear. You enable it in the Settings dialogue, Advanced page, Output Analysis Values checkbox. Then use the Analysis component from the Utilities panel. For example, if you wire a Panel component into the Axis Values socket you'll see all the axis values for each command that's run.
+
 
+
[[File:kuka prc_Analysis.jpg]]
+
 
+
'''Settings'''
+
 
+
The grey KUKA|prc Settings label at the bottom of the Core component gives you access to its settings. Simply left click on the label and the dialog will appear.
+
 
+
The settings are organized into pages which you select from along the top edge of the dialog (Settings, Advanced, and Analysis). The dialog is modeless which means you can operate Rhino while it is open. To see the effect of your changes in the viewport click the Apply button. These settings will be covered in more detail later.
+
 
+
[[File:kuka prc_Settings1.jpg]]
+
 
+
'''Basic Setup'''
+
There is a common set of components used in nearly all definitions for use with the Agilus Workcell. Not surprisingly, these correspond to the inputs on the Core component. Here is a very typical setup:
+
 
+
[[File:kuka prc_BasicSetup.jpg]]
+
 
+
SIM SLIDER: The simulation Slider goes from 0.000 to 1.000. Dragging it moves the robot through all the motion specified by the Command input. It's often handy to drag the right edge of this slider to make it much wider than the default size. This gives you greater control when you scrub to watch the simulation. You may also want to increase the precision from a single decimal point to several (say 3 or 4). Without that precision, you may not be able to scrub to all the points you want to visualize the motion going through.
+
 
+
You can also add a Play/Pause component. This lets you simulate without dragging the time slider.
+
+
CMDS: The components which get wired into the CMDS slot of the Core is really the heart of your definition and will obviously depend on what you are intending the robot to do. In the example above a simple Linear Move, the component is wired in.
+
 
+
TOOL: We normally use custom tools with the Agilus Workcell. Therefore a Mesh component gets wired into the KUKA|prc Custom Tool component (labelled TOOL above). This gets wired into the TOOL slot of the Core. The Mesh component points to a mesh representation of the tool drawn in the Rhino file. See the section below on Tool orientation and configuration.
+
 
+
ROBOT: The robots we have in the Agilus Workcell are KUKA KR6 R900s. So that component is chosen to form the Virtual Robots panel. It gets wired into the ROBOT slot of the Core.
+
 
+
COLLISION: If you want to check for collisions between the robot and the work cell (table) wire in the meshes which represent the work cell. As noted above this has a large negative impact on performance so use this only when necessary.
+
 
+
'''Robot Position and Orientation'''
+
 
+
The Agilus workcell has two robots named Mitey and Titey. Depending on which one you are using you'll need to set up some parameters so your simulation functions correctly. These parameters specify the location and orientation of the robot within the workcell 3D model.
+
 
+
Note: The latest revision of Kuka|prc contains a custom robot for the Agilus workcell. It has two output sockets, Mitey and Titey. Simply wire in the robot you intend to use and no more configuration is required.
+
 
+
If you don't have the latest version, see below for how to set them up.
+
 
+
MITEY
+
 
+
Mitey is the name of the robot mounted in the table. Its base is at 0,0,0. The robot is rotated about its vertical axis 180 degrees. That is, the cable connections are on the right side of the robot base as you face the front of the workcell.
+
 
+
[[File:kuka prc_MiteyTiteyComp.jpg]]
+
 
+
To set up Mitey do the following:
+
 
+
Bring up the Settings dialog by left clicking on KUKA|prc Settings label on the Core component. The dialog presented is shown below:
+
 
+
[[File:kuka prc_BaseSetup.jpg]]
+
 
+
You specify the X, Y, and Z offsets in the Base X, Base Y, and Base Zdialogues of the dialog. Again, for Mitey these should all be 0. In order to rotate the robot around the vertical axis you specify 180 in the Base A field. You can see that the A axis corresponds to vertical in the diagram.
+
 
+
Base X: 0
+
Base Y: 0
+
Base Z: 0
+
Base A: 180
+
Base B: 0
+
Base C: 0
+
 
+
After you hit Apply the robot position will be shown in the viewport. You can close the dialog with the Exit button in the upper right corner.
+
 
+
TITEY
+
 
+
The upper robot hanging from the fixture is named Titey. It has a different X, Y and Z offset values and rotations. Use the settings below when your definition should run on Titey.
+
 
+
[[File:Kuka prc BaseSetup.jpg]]
+
 
+
Note: These values are all in millimetres.
+
Base X: 1102.5
+
Base Y: 0
+
Base Z: 1125.6
+
Base A: 90
+
Base B: 180
+
Base C: 0
+
 
+
'''Code Output'''
+
 
+
The purpose of KUKA|prc is to generate the code which runs on the robot controller. This code is usually in the Kuka Robot Language (KRL). You need to tell KUKA|prc what directory and file name to use for its code output. Once you've done this, as you make changes in the UI, the output will be re-written as necessary to keep the code up to date with the Grasshopper definition.
+
 
+
To set the output directory and file name follow these steps:
+
Bring up the Settings dialogue via the Core component.
+
On the main Settings page, enter the project filename and choose an output directory. Note: See the? button in the dialogue for recommendations on the filename (which characters to avoid).
+
 
+
[[File:Kuka_prc_Output.jpg]]
+
 
+
 
+
'''Start Position / End Position'''
+
 
+
When you work with robots there are certain issues you always have to deal with:
+
Reach: Can the robot's arms reach the entire workpiece?
+
Singularities: Will any joint positions result in singularities? (See below for more on this topic)
+
Joint Limits: During the motion of the program will any of the axes hit their limits?
+
One setting which has a major impact on these is the Start Position. The program needs to know how the tool is positioned before the motion starts. This value is VERY important. That's because it establishes an initial placement for the joint limits. Generally, you should choose a start position that doesn't have any of the joints near their rotation limits - otherwise, your programmed path may cause them to hit the joint limit. This is a really common error. Make sure you aren't unintentionally near any of the axes limits. Also, the robot will move from it's current position (wherever that may be) to the start position. It could move right through your workpiece or fixture setup. So make sure you are aware of where the start position is, and make sure there's a clear path from the current position of the robot to the start position. In other words, jog the robot near to the start position to begin. That'll ensure the motion won't hit your set up.
+
 
+
You specify these start and end position values in the Settings of the Core. Bring up the settings dialog and choose the Advanced page.
+
 
+
Under the Start / Endposition section, you enter the axis values for A1 through A6. This begs the questions "how do I know what values to use?".
+
 
+
 
+
[[File:kuka prc_StartEndPositions.jpg]]
+
 
+
You can read these directly from the physical robot pendant. That is, you jog the robot into a reasonable start position and read the values from the pendant display. Enter the values into the dialog. Then do the same for the End values. See the section Jogging the Robot in topic Taubman College Agilus Workcell Operating Procedure.
+
 
+
You can also use KUKA|prc to visually set a start position and read the axis values to use. To do this you wire in the KUKA|prc Axis component into the Core component. You can "virtually jog" the robot to a specific position using a setup like this:
+
 
+
[[File:kuka prc_StartPositionSetup.jpg]]
+
 
+
Then simply read the axis values from your sliders and enter these as the Start Position or End Position.
+
 
+
Another way is to move the simulation to the start point of the path. Then read the axis values from the Analysis output of the Core Settings dialog. You can see the numbers listed from A01 to A06. Jot these down, one decimal place is fine. Then enter them on the Advanced page.
+
 
+
[[File:kuka prc_JointAnalysisValues.jpg]]
+
 
+
'''Initial Posture'''
+
 
+
Related to the Start Point is the Initial Posture setting. If you've set the Start Position as above and are still seeing motion (like a big shift in one of the axis to reorient) try the As Start option. This sets the initial posture to match the start position.
+
 
+
[[File:kuka prc_InitialPosture.jpg]]
+
 
+
 
+
 
+
== Robot Programming with Robots plugin ==
+
[part of the information explained here is coming from: https://github.com/visose/Robots/wiki/How-To-Use#grasshopper]
+
 
+
Grasshopper plugin for programming ABB, KUKA and UR robots for custom applications. Special care is taken to have feature parity between all manufacturers and have them behave as similar as possible. The plugin can also be used as a .NET library to create robot programs through scripting inside Rhino (using Python, C# or VB.NET). Advanced functionality is only exposed through scripting.
+
 
+
'''How To Use'''
+
 
+
The basic Grasshopper workflow:
+
 
+
1- Select your robot model using the "Load robot" component.
+
 
+
2- Define your end effector (TCP, weight and geometry) using the "Create tool" component.
+
 
+
3- Create a flat list of targets that define your tool path using the "Create target" component.
+
 
+
4- Create a robot program connecting your list of targets and robot model to the "Create program" component.
+
 
+
5- Preview the tool path using the "Simulation" component.
+
 
+
6- Save the robot program to a file using the "Save program" component. If you're using a UR robot, you can also use the "Remote UR" component to stream the program through a network.
+
 
+
 
+
'''Parameters'''
+
 
+
TARGET
+
 
+
[[File:ROBOTS_target.JPG]]
+
 
+
A target defines a robot pose, how to reach it and what to do when it gets there. A tool path is made out of a list of targets. Besides the pose, targets have the following attributes: tool, speed, zone, frame, external axes and commands.
+
 
+
There are two types of targets, joint targets and Cartesian targets:
+
 
+
Joint target: The pose of the robot is defined by 6 rotation values corresponding to the 6 axes. This is the only way to unambiguously define a pose. The first target of a robot program should be a joint target.
+
 
+
Cartesian target: The pose of the robot is defined by a plane that corresponds to the desired position and orientation of the TCP. Cartesian targets can produce singularities, the most common being wrist singularities. This happens when the desired position and orientation requires the 4th and 6th joints to be parallel to each other.
+
 
+
 
+
 
+
Cartesian targets contain two optional attributes, configuration and motion type:
+
 
+
CONFIGURATION
+
 
+
Industrial robots have 8 different joint configurations to reach the same TCP position and orientation. By default, the configuration in which the joints have to rotate the least is selected. This is determined using the least squares method, which is also the closest distance between targets in joint space. All joints are weighted equally. You can explicitly define a configuration by assigning a value (from 0 to 7) to the Configuration variable. Forcing a configuration doesn't define a pose unambiguously since the joints might rotate clockwise or counter-clockwise depending on the previous target.
+
 
+
'''Motion type'''
+
 
+
A robot can move towards a Cartesian target following either a joint motion or a linear motion:
+
 
+
Joint: This is the default motion type. In a joint motion, the controller calculates the joint rotation values on the target using inverse kinematics and moves all of the joints at proportional but fixed speeds so that they will stop at the same time at the desired target. The motion is linear in joint space but the TCP will follow a curved path in world space. It's useful if the path that the TCP follows is not critical, like in pick and place operations. Since inverse kinematics only needs to be calculated at the end of the path, it's also useful to avoid singularities.
+
 
+
[[File:ROBOTS_target_joint.JPG]]
+
 
+
Linear: The robot moves towards the target in a straight line in world space. This is useful if the path that the TCP follows is critical, like while milling or extruding material. If the path goes through a singularity at any point it will not be able to continue. If it moves close to a singularity it might slow down below the programmed speed.
+
 
+
[[File:ROBOTS_target_linear.JPG]]
+
 
+
'''Castings'''
+
 
+
A string containing 6 numbers separated by commas will create a joint target with default attribute values.
+
A plane will create a Cartesian target with default attribute values.
+
 
+
'''Tool'''
+
 
+
[[File:ROBOTS_create a tool.JPG]]
+
 
+
This parameter defines a tool or end effector mounted to the flange of the robot. In most cases a single tool will be used throughout the tool path, but each target can have a different tool assigned. You might want to change tool if your end effector has more than one TCP, or due to load changes during pick and place. Contains the following attributes:
+
 
+
Name: Name of the tool (should not contain spaces or special characters). The name is used to identify the tool in the pendant and create variable names in post-processing.
+
 
+
TCP: Stand for "tool center point". Represents the position and orientation of the tip of the end effector in relation to the flange. The default value is the world XY plane (the center of the flange).
+
 
+
Weight: The weight of the end effector in kilograms. The default value is 0 kg.
+
 
+
Mesh: Single mesh representing the geometry of the tool. Used for visualization and collision detection.
+
 
+
'''Coordinate systems'''
+
 
+
[[File:ROBOTS_coordinate system.jpg]]
+
 
+
As with Rhino, the plugin uses a right-handed coordinate system. The main coordinate systems are:
+
 
+
World coordinate system: It's the Rhino document's coordinate system. Cartesian robot targets are defined in this system. They've transformed to the robot coordinate system during post-processing.
+
 
+
Robot coordinate system: Used to position the robot in reference to the world coordinate system. By default, robots are placed in the world XY plane. The X axis points away from the front of the robot, the Z axis points vertically.
+
 
+
Tool coordinate system: Used to define the position and orientation of the TCP relative to the flange. The Z axis points away from the flange (normal to the flange), the X axis points downwards.]]
+
 
+
As with Rhino, the plugin uses a right-handed coordinate system. The main coordinate systems are:
+
 
+
World coordinate system: It's the Rhino document's coordinate system. Cartesian robot targets are defined in this system. They have transformed into the robot coordinate system during post-processing.
+
 
+
Robot coordinate system: Used to position the robot in reference to the world coordinate system. By default, robots are placed in the world XY plane. The X axis points away from the front of the robot, the Z axis points vertically.
+
 
+
Tool coordinate system: Used to define the position and orientation of the TCP relative to the flange. The Z axis points away from the flange (normal to the flange), the X-axis points downwards.
+
 
+
'''Robot'''
+
 
+
[[File:ROBOTS_create a program.jpg]]
+
 
+
Represents a specific robot model. It's used to calculate the forward and inverse kinematics for Cartesian targets, to check for possible errors and warnings on a program, for collision detection and simulation. If your robot model is not included in the assembly, check the wiki on how to add your own custom models.
+
 
+
Remote connection: You can use the robot parameter to connect to the robot controller through a network. Currently, this is only supported on UR robots.
+
 
+
 
+
 
+
Create a program:
+
+
 
+
Units: The plugin always uses the same units irrespective of the robot type or document settings.
+
 
+
Length: Millimeters
+
 
+
Angle: Radians
+
 
+
Weight: Kilograms
+
 
+
Time: Seconds
+
 
+
Linear speed: Millimeters per second
+
 
+
Angular speed: Radians per second
+
 
+
'''Uploading the program to a robot'''
+
 
+
A program defines a complete toolpath and creates the necessary robot code to run it. To create a program you need a list of targets and a robot model.
+
 
+
[[File:ROBOTS_create a program.JPG]]
+
 
+
When a program is created, the following post-processing is done:
+
 
+
It will clean up and fix common mistakes.
+
 
+
It will run through the sequence of targets checking for kinematic or other errors.
+
 
+
It will return warnings for unexpected behaviour.
+
 
+
It will generate a simulation to preview the toolpath.
+
 
+
It calculates an approximate duration of the program.
+
 
+
If there are no errors, it will generate the necessary code in the robot's native language.
+
 
+
'''Errors'''
+
 
+
After the first error is found, it will stop and output a program ending in the error. Most errors are due to kinematics (the TCP not being able to position itself on the target). There are other errors, like exceeding the maximum payload. To identify the error, preview simulation of the program at the last target. Programs that contain errors won't create native code.
+
 
+
'''Warnings'''
+
 
+
The program will also inform of any warnings to take into account. Warnings may include changes in configuration, maximum joint speed reached, targets with unassigned values, first target not set as a joint target. Programs that contain warnings will create native code and might be safe to run if the warnings are believed to not cause any issues.
+
 
+
'''Code'''
+
 
+
To run the program, a code has to be generated in the specific language used by the manufacturer (RAPID for ABB robots, KRL for KUKA robots and URScript for UR robots). If necessary, this code can then be edited manually. A program containing edited code will not check for warnings or errors and can't be simulated.
+
 
+
'''Simulation'''
+
 
+
The program contains a simulation of the tool path. The simulation currently doesn't take into account acceleration, deceleration or approximation zones. It simulates both linear and joint motions, actual robot speed, including slowdowns when moving close to singularities and wait times.
+
 
+
'''Zone'''
+
 
+
Defines an approximation zone for a target. Two variables make up a zone, a distance (in mm) and a rotation (in radians). The default value is 0 mm.
+
 
+
[[File:ROBOTS_zone parameter.JPG]]
+
 
+
Targets can be stop points or way points:
+
 
+
Stop points have a distance and rotation value of 0. All axis will completely before moving to the next target. Commands associated with this target will run just after the TCP reaches the target.
+
 
+
Way points have a distance or rotation value greater than 0. Once the TCP position is within the distance value to the target, it will start moving towards the next target. One the TCP orientation is within the rotation value, it will start orienting towards the next target. This is useful to create a continuous path and avoid the robot stopping (decelerating and accelerating) at the cost of precision. Commands associated with this target will usually run a bit before the TCP enters the zone area.
+
 
+
IMPORTANT: If multiple targets use the same zone, first use a string or number to cast into a zone parameter, then assign the parameter to the different targets. Don't assign a string or number directly as a zone to multiple targets, as different zone instances will be created (even if they have the same value) and will create unnecessary duplication in the robot code.
+
 
+
[[Category:Software]][[Category:Robotic programming]]
+

Revision as of 21:49, 11 November 2018

Subcategories

This category has the following 3 subcategories, out of 3 total.