Difference between revisions of "Ecoplus TS-20 Drill Press"

From Fab Lab Bcn WIKI
Jump to: navigation, search
Line 5: Line 5:
 
Ecoplus TS-20 Drill Press
 
Ecoplus TS-20 Drill Press
  
External link:
+
==How to use==
  
https://www.bricolandia.es/belflex-taladro-de-sobremesa-ep-ts-20-44174000/
+
*One speed. You don't need to set the speed.
  
 +
*Fit the Bit. Open the chuck, slide in the bit, snug the chuck by hand around the bit’s shaft, then tighten.
  
The column drill is built according to our well known approved technique for highest torque. Helical gears combined with steel gears against reinforced fiber gears ensure strong gear teeth’s, longer lifetime, low sound level and a more or less maintenance free gear box.
+
*Adjust the Table. Release the clamping lever on the back of the platform and turn the crank on the right side to adjust the table height.
  
Both Drill head and table arm are turned able 360° around the column and also adjustable.
+
*Gauging the Depth.  
  
Working table is turned able 360° around its own center.
+
*Secure the Workpiece. The ro­tation of the drill bit may try to spin the wood or metal workpiece, so it must be clamped to the worktable.
 +
 
 +
*Drilling.
 +
 
 +
==Advantages==
 +
 
 +
A drill press has a number of advantages over a hand-held drill:
 +
 
 +
*Less effort is required to apply the drill to the workpiece.
 +
*The movement of the chuck and spindle is by a lever working on a rack and pinion, which gives the operator considerable mechanical advantage
 +
*The table allows a vise or clamp to be used to position and restrain the work, making the operation much more secure
 +
*The angle of the spindle is fixed relative to the table, allowing holes to be drilled accurately and consistently
 +
*Drill presses are almost always equipped with more powerful motors compared to hand-held drills. This enables larger drill bits to be used and also speeds up drilling with smaller bits.
 +
 
 +
==External link==
 +
 
 +
https://www.bricolandia.es/belflex-taladro-de-sobremesa-ep-ts-20-44174000/

Revision as of 12:12, 24 March 2020

Ecoplus TS-20 Drill Press

Ecoplus TS-20 Drill Press

How to use

  • One speed. You don't need to set the speed.
  • Fit the Bit. Open the chuck, slide in the bit, snug the chuck by hand around the bit’s shaft, then tighten.
  • Adjust the Table. Release the clamping lever on the back of the platform and turn the crank on the right side to adjust the table height.
  • Gauging the Depth.
  • Secure the Workpiece. The ro­tation of the drill bit may try to spin the wood or metal workpiece, so it must be clamped to the worktable.
  • Drilling.

Advantages

A drill press has a number of advantages over a hand-held drill:

  • Less effort is required to apply the drill to the workpiece.
  • The movement of the chuck and spindle is by a lever working on a rack and pinion, which gives the operator considerable mechanical advantage
  • The table allows a vise or clamp to be used to position and restrain the work, making the operation much more secure
  • The angle of the spindle is fixed relative to the table, allowing holes to be drilled accurately and consistently
  • Drill presses are almost always equipped with more powerful motors compared to hand-held drills. This enables larger drill bits to be used and also speeds up drilling with smaller bits.

External link

https://www.bricolandia.es/belflex-taladro-de-sobremesa-ep-ts-20-44174000/