Difference between revisions of "Ecoplus TS-20 Drill Press"

From Fab Lab Bcn WIKI
Jump to: navigation, search
 
(3 intermediate revisions by one user not shown)
Line 1: Line 1:
 
[[Category:Hand tools]]
 
[[Category:Hand tools]]
−
 
+
__NOTOC__
 
[[File:Ecoplus-TS-20-p59.png| thumb |Ecoplus TS-20 Drill Press]]
 
[[File:Ecoplus-TS-20-p59.png| thumb |Ecoplus TS-20 Drill Press]]
  
−
Ecoplus TS-20 Drill Press
+
'''Description''':
  
−
External link:
+
A drill press is a style of drill that may be mounted on a stand or bolted to the floor or workbench.
  
−
https://www.bricolandia.es/belflex-taladro-de-sobremesa-ep-ts-20-44174000/
+
Major components include a base, column (or pillar), adjustable table, spindle, chuck, and drill head, usually driven by an electric motor. The head has a set of three handles radiating from a central hub that are turned to move the spindle and chuck vertically.  
  
 +
==Safety==
 +
*Always wear safety glasses and if you are drilling metal, additional gloves and mask are required.
 +
*The ro­tation of the drill bit may try to spin the wood or metal workpiece, so ensure it is clamped securely to the worktable.
  
−
The column drill is built according to our well known approved technique for highest torque. Helical gears combined with steel gears against reinforced fiber gears ensure strong gear teeth’s, longer lifetime, low sound level and a more or less maintenance free gear box.
+
==How to use==
  
−
Both Drill head and table arm are turned able 360° around the column and also adjustable.
+
*Tool to drill wood, metal and plastic
  
−
Working table is turned able 360° around its own center.
+
*One speed. You don't need to set the speed.
 +
 
 +
*Fit the bit. Open the chuck, slide in the bit, snug the chuck by hand around the  shaft of the bit, then tighten.
 +
 
 +
*Adjust the table. Release the clamping lever on the back of the platform and turn the crank on the right side to adjust the table height.
 +
 
 +
*Gauging the depth.
 +
 
 +
*Secure the workpiece with clamps
 +
 
 +
*Drill
 +
 
 +
*Drilling.
 +
 
 +
==Advantages==
 +
 
 +
A drill press has a number of advantages over a hand-held drill:
 +
 
 +
*Less effort is required to apply the drill to the workpiece.
 +
*The movement of the chuck and spindle is by a lever working on a rack and pinion, which gives the operator considerable mechanical advantage.
 +
*The table allows a vise or clamp to be used to position and restrain the work, making the operation much more secure and accurate.
 +
*The angle of the spindle is fixed relative to the table, allowing holes to be drilled accurately and consistently.
 +
*Drill presses are almost always equipped with more powerful motors compared to hand-held drills. This enables larger drill bits to be used and also speeds up drilling with smaller bits.
 +
 
 +
==External link==
 +
 
 +
https://www.bricolandia.es/belflex-taladro-de-sobremesa-ep-ts-20-44174000/

Latest revision as of 11:42, 27 April 2020

Ecoplus TS-20 Drill Press

Description:

A drill press is a style of drill that may be mounted on a stand or bolted to the floor or workbench.

Major components include a base, column (or pillar), adjustable table, spindle, chuck, and drill head, usually driven by an electric motor. The head has a set of three handles radiating from a central hub that are turned to move the spindle and chuck vertically.

Safety

  • Always wear safety glasses and if you are drilling metal, additional gloves and mask are required.
  • The ro­tation of the drill bit may try to spin the wood or metal workpiece, so ensure it is clamped securely to the worktable.

How to use

  • Tool to drill wood, metal and plastic
  • One speed. You don't need to set the speed.
  • Fit the bit. Open the chuck, slide in the bit, snug the chuck by hand around the shaft of the bit, then tighten.
  • Adjust the table. Release the clamping lever on the back of the platform and turn the crank on the right side to adjust the table height.
  • Gauging the depth.
  • Secure the workpiece with clamps
  • Drill
  • Drilling.

Advantages

A drill press has a number of advantages over a hand-held drill:

  • Less effort is required to apply the drill to the workpiece.
  • The movement of the chuck and spindle is by a lever working on a rack and pinion, which gives the operator considerable mechanical advantage.
  • The table allows a vise or clamp to be used to position and restrain the work, making the operation much more secure and accurate.
  • The angle of the spindle is fixed relative to the table, allowing holes to be drilled accurately and consistently.
  • Drill presses are almost always equipped with more powerful motors compared to hand-held drills. This enables larger drill bits to be used and also speeds up drilling with smaller bits.

External link

https://www.bricolandia.es/belflex-taladro-de-sobremesa-ep-ts-20-44174000/

Retrieved from "https://wiki.fablabbcn.org/index.php?title=Ecoplus_TS-20_Drill_Press&oldid=9807"