Difference between revisions of "Ecoplus TS-20 Drill Press"

From Fab Lab Bcn WIKI
Jump to: navigation, search
Line 6: Line 6:
  
 
==How to use==
 
==How to use==
 +
 +
*Use always glasses and if you're drilling metal, gloves are required
 +
 +
*Tool to drill wood, metal and plastic
  
 
*One speed. You don't need to set the speed.
 
*One speed. You don't need to set the speed.

Revision as of 12:17, 24 March 2020

Ecoplus TS-20 Drill Press

Ecoplus TS-20 Drill Press

How to use

  • Use always glasses and if you're drilling metal, gloves are required
  • Tool to drill wood, metal and plastic
  • One speed. You don't need to set the speed.
  • Fit the Bit. Open the chuck, slide in the bit, snug the chuck by hand around the bit’s shaft, then tighten.
  • Adjust the Table. Release the clamping lever on the back of the platform and turn the crank on the right side to adjust the table height.
  • Gauging the Depth.
  • Secure the Workpiece. The ro­tation of the drill bit may try to spin the wood or metal workpiece, so it must be clamped to the worktable.
  • Drilling.

Advantages

A drill press has a number of advantages over a hand-held drill:

  • Less effort is required to apply the drill to the workpiece.
  • The movement of the chuck and spindle is by a lever working on a rack and pinion, which gives the operator considerable mechanical advantage
  • The table allows a vise or clamp to be used to position and restrain the work, making the operation much more secure
  • The angle of the spindle is fixed relative to the table, allowing holes to be drilled accurately and consistently
  • Drill presses are almost always equipped with more powerful motors compared to hand-held drills. This enables larger drill bits to be used and also speeds up drilling with smaller bits.

External link

https://www.bricolandia.es/belflex-taladro-de-sobremesa-ep-ts-20-44174000/