Difference between revisions of "Epilog Laser Cutter"

Revision as of 17:30, 13 July 2011 (view source) Mari-ah! (Talk | contribs) (→‎Properties) ← Older edit		Revision as of 17:50, 13 July 2011 (view source) Mari-ah! (Talk | contribs) (→‎Cardboard Corrugated 5mm (2 layers)) Newer edit →
Line 59:		Line 59:
	===Cardboard Corrugated 5mm (2 layers)===		===Cardboard Corrugated 5mm (2 layers)===
	CUT:		CUT:
−	*Speed:15%	+	*Speed:55%
−	*Power: 60%	+	*Power: 45%
−	ENGRAVE:	+
−	*Speed:15%	+
−	*Power: 60%	+

---

Revision as of 17:50, 13 July 2011

Properties

Polipropileno / Polypropylene 0.5mm:

CUT:

• Speed: 60%
• Power: 40%

ENGRAVE:

• Speed: 90%
• Power: 15%

Polipropileno / Polypropylene 0.8mm:

CUT:

• Speed: 60%
• Power: 70%

Papel / Paper (thicker)

CUT:

• Speed: 60%
• Power: 30%

Papel / Paper (shine 1 side)

CUT:

• Speed: 60%
• Power: 25%

ENGRAVE:

• Speed: 95%
• Power: 4%

Papel transparente / Transparent Paper

CUT:

• Speed: 75%
• Power: 20%

Madera/ Plywood 3mm

CUT:

• Speed: 15%
• Power: 45%

ENGRAVE:

• Speed: 40%
• Power: 10%

Fieltro / Felt (white) 3mm

CUT:

• Speed: 60% (70%)
• Power: 30%

Fieltro / Felt (color) 1mm

CUT:

• Speed: 90% (70%)
• Power: 10%

Plexiglass 3mm

CUT:

• Speed:15%
• Power: 60%

Cardboard Corrugated 5mm (2 layers)

CUT:

• Speed:55%
• Power: 45%