Difference between revisions of "Epilog Laser Cutter"
From Fab Lab Bcn WIKI
| Line 11: | Line 11: | ||
Speed: 90% | Speed: 90% | ||
Power: 15% | Power: 15% | ||
| + | |||
Polipropileno / Polypropylene 0.8mm: | Polipropileno / Polypropylene 0.8mm: | ||
| Line 17: | Line 18: | ||
Speed: 60% | Speed: 60% | ||
Power: 70% | Power: 70% | ||
| + | |||
Papel / Paper (thicker) | Papel / Paper (thicker) | ||
| Line 23: | Line 25: | ||
Speed: 60% | Speed: 60% | ||
Power: 30% | Power: 30% | ||
| + | |||
Papel / Paper (shine 1 side) | Papel / Paper (shine 1 side) | ||
| Line 33: | Line 36: | ||
Speed: 95% | Speed: 95% | ||
Power: 4% | Power: 4% | ||
| + | |||
Papel transparente / Transparent Paper | Papel transparente / Transparent Paper | ||
| Line 39: | Line 43: | ||
Speed: 75% | Speed: 75% | ||
Power: 20% | Power: 20% | ||
| + | |||
Madera/ Plywood 3mm: | Madera/ Plywood 3mm: | ||
| Line 49: | Line 54: | ||
Speed: 40% | Speed: 40% | ||
Power: 10% | Power: 10% | ||
| − | |||
| Line 57: | Line 61: | ||
Speed: 60% (70%) | Speed: 60% (70%) | ||
Power: 30% | Power: 30% | ||
| + | |||
Fieltro / Felt (color) 1mm: | Fieltro / Felt (color) 1mm: | ||
| Line 63: | Line 68: | ||
Speed: 90% (70%) | Speed: 90% (70%) | ||
Power: 10% | Power: 10% | ||
| + | |||
Plexiglass 3mm: | Plexiglass 3mm: | ||
Revision as of 16:50, 29 November 2010
Properties:
Polipropileno / Polypropylene 0.5mm:
CUT: Speed: 60% Power: 40%
ENGRAVE: Speed: 90% Power: 15%
Polipropileno / Polypropylene 0.8mm:
CUT: Speed: 60% Power: 70%
Papel / Paper (thicker)
CUT: Speed: 60% Power: 30%
Papel / Paper (shine 1 side)
CUT: Speed: 60% Power: 25%
ENGRAVE: Speed: 95% Power: 4%
Papel transparente / Transparent Paper
CUT: Speed: 75% Power: 20%
Madera/ Plywood 3mm:
CUT: Speed: 15% Power: 45%
ENGRAVE: Speed: 40% Power: 10%
Fieltro / Felt (white) 3mm:
CUT: Speed: 60% (70%) Power: 30%
Fieltro / Felt (color) 1mm:
CUT: Speed: 90% (70%) Power: 10%
Plexiglass 3mm:
CUT: Speed:15% Power: 60%
