Epilog Laser Cutter

From Fab Lab Bcn WIKI
Revision as of 23:43, 28 February 2011 by Guillem (Talk | contribs)

Jump to: navigation, search


Properties

Polipropileno / Polypropylene 0.5mm:

CUT: Speed: 60% Power: 40%

ENGRAVE: Speed: 90% Power: 15%


Polipropileno / Polypropylene 0.8mm:

CUT: Speed: 60% Power: 70%


Papel / Paper (thicker)

CUT: Speed: 60% Power: 30%


Papel / Paper (shine 1 side)

CUT: Speed: 60% Power: 25%

ENGRAVE: Speed: 95% Power: 4%


Papel transparente / Transparent Paper

CUT: Speed: 75% Power: 20%


Madera/ Plywood 3mm:

CUT: Speed: 15% Power: 45%

ENGRAVE: Speed: 40% Power: 10%


Fieltro / Felt (white) 3mm:

CUT: Speed: 60% (70%) Power: 30%


Fieltro / Felt (color) 1mm:

CUT: Speed: 90% (70%) Power: 10%


Plexiglass 3mm:

CUT: Speed:15% Power: 60%