Difference between revisions of "Formbytes"

From Fab Lab Bcn WIKI
Jump to: navigation, search
Line 1: Line 1:
  
−
== Formbytes ==
+
== Formbytes One ==
−
This page is dedicated to specific details about the 3d-printer model "Formbytes".
+
FormBytes One is a professional-quality 3D printer sold in a kit easy to assemble.
 +
It is available in a fun and attractive range of colors to choose from.
  
 
[[Category:Old Machines]]
 
[[Category:Old Machines]]
  
−
[[File:Formbytes_full_view.JPG| thumb |left|A 2016 Formbytes exemplar at IAAC FAB LAB in Barcelona]]
 
−
[[File:Formbytes back to info screen.JPG| thumb |left|Formbytes]]
 
−
[[File:Formbytes_prepare.JPG| thumb |left|Formbytes]]
 
−
[[File:Formbytes move 0point1 mm.JPG| thumb |left|Now use the scroll to adjust the axis.]]
 
−
[[File:Formbytes_move_axis.JPG| thumb |left|Formbytes]]
 
−
[[File:Formbytes_preheat_pla.JPG| thumb |left|Formbytes]]
 
−
[[File:Formbytes_print_from_sd.JPG| thumb |left|In order to print your model you have to access your file by selecting "print from SD card".]]
 
−
[[File:Formbytes_progress_31degrees.JPG| thumb |left|Formbytes]]
 
−
[[File:Formbytes_progress_35degrees.JPG| thumb |left|Formbytes]]
 
−
[[File:Formbytes_extruder.JPG| thumb |left|Formbytes]]
 
−
[[File:Formbytes_extruder_use.JPG| thumb |left|Now use the scroll to adjust the extruder.]]
 
−
[[File:Formbytes_disable_steppers.JPG| thumb |left|Formbytes]]
 
−
[[File:formbytes_important_instruction.JPG| thumb |left|It is important to keep the ABS plastic cord like this.]]
 
−
 
−
==Precaution==
 
−
 
−
* '''Never leave the laser device unattended while the system is operating.'''
 
−
* Always have a fire extinguisher available, as the laser beam can ignite flammable materials.
 
−
* Do not put any flammanle materials in the inside of the device or in the immediate surroundings of the device.
 
−
* Be aware of all Laser safety stickers on the machine and follow them.
 
−
* The system must be used only by authorized and trained personnel.
 
−
* Avoid electrostatic charging during cable connections / plug-in.
 
−
* Do not start the Laser machine without an adequate exhaust system.
 
−
* In case of a broken lens: avoid direct skin contact and inhaling.
 
−
* "EMERGENCY-STOP": on any risk: LIFT THE COVER LID!
 
−
<br>
 
−
[http://wiki.fablabbcn.org/Material_laser Material Laser Cut]
 
−
<br>
 
−
<br>
 
−
==Procedures on the softwares==
 
−
===Rhino===
 
−
====Geometry====
 
−
* Join the geometry
 
−
[[File:Join.jpg| 700 × 402 pixels]]<br><br>
 
−
* Check the scale of the drawing , make sure you are in millimeters and that your material fits in the laser.
 
−
[[File:Scale.jpg| 700 × 402 pixels]]<br><br>
 
−
* Seldup command selects duplicate lines. Keep in mind that is there are more than one lines the laser cutter will pass more times over the same place.
 
−
[[File:3SelDup.jpg| 700 × 402 pixels]]<br><br>
 
−
* Make2d if you import your drawing from other programs other than rhino and to make sure that everything is on 0 in Z plane.
 
−
[[File:4Make2D.jpg| 700 × 402 pixels]]<br><br>
 
−
* Change object layer : hairline
 
−
[[File:Hairline.jpg| 500 × 202 pixels]]<br><br>
 
−
[[File:4LayersColour.jpg| 700 × 402 pixels]]<br><br>
 
−
{| class="wikitable"
 
−
|-valign="top"
 
−
|[[File:4ColourSelection.jpg| 700 × 402 pixels]]
 
−
|<br>Engrave <br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut
 
−
|}
 
−
<br>
 
−
 
−
====Printing====
 
−
* Ctrl+p : Print
 
−
[[File:4WindowPrint.jpg| 4WindowsPrint ]]<br><br>
 
−
* Properties
 
−
[[File:5Print.jpg| 700 × 402 pixels]]<br><br>
 
−
[[File:5Preference.jpg| 700 × 402 pixels]]<br><br>
 
−
* Material Database
 
−
[[File:5MaterialDataBase.jpg|Material]]<br><br>
 
−
*Process options
 
−
[[File:5Process options.jpg|Process options]]<br><br>
 
−
[[File:5Valid.jpg|Valid]]<br><br>
 
−
* Set the view
 
−
[[File:Settheview.jpg|Set the view]]<br><br>
 
−
* Drag the square to define your print window
 
−
[[File:PrintWindow.jpg|Print Window]]<br><br>
 
−
* Press enter and once you come back to the previous screen clic on print.
 
−
<br>
 
−
===Job control===
 
−
[http://www.troteclaser.com/en-US/Support/Documents/JobControl-Manual-EN.pdf JobControl Manual]
 
−
<br>
 
−
* Selection of your file
 
−
[[File:Selection.jpg|Selection]]<br><br>
 
−
 
−
<br><br><br>
 
−
 
−
==The Machine : Trotec Speedy 400==
 
−
[http://www.troteclaser.com/en-US/Support/Documents/Speedy-300-Manual-EN.pdf Operation Manual]
 
 
===Characteristics===
 
===Characteristics===
 
{| class="wikitable"
 
{| class="wikitable"
 +
|
 +
! FormBytes One v1 (2015)
 +
! FormBytes One v2 (2016)
 
|-
 
|-
 
| Overall dimensions (W x D x H)
 
| Overall dimensions (W x D x H)
−
| 1400 * 950 * 1070 mm
+
| Approx. 28 * 31 * 43 mm
 +
| Approx. 28 * 31 * 43 mm
 
|-
 
|-
−
| Working area
+
| Printing Area
−
| 1000 * 610 mm
+
| 150*150*100 mm
 +
| 150*150*100 mm
 
|-
 
|-
 
| Max. height of workpiece
 
| Max. height of workpiece
−
| 305 mm
+
| 100 mm
 +
| 100 mm
 
|-
 
|-
 
| Max. processing speed
 
| Max. processing speed
−
| 355 cm / second, acceleration 4g
+
| ? cm / second, acceleration ?g
 +
| ? cm / second, acceleration ?g
 +
|-
 +
|Resolution
 +
| 0.1 mm
 +
| 0.1 mm
 
|-
 
|-
 
| Accuracy
 
| Accuracy
−
| Addressable accuracy: 5 microm<br> Static repeat accuracy: < +/- 15microm
+
| Addressable accuracy: ? microm<br> Static repeat accuracy: < +/- ?microm
−
|-
+
| Addressable accuracy: ? microm<br> Static repeat accuracy: < +/- ?microm
−
| Mechanical design
+
−
| Fully enclosed chassis with double safety interlock system laser safety class, <br>CE coñpliant maintenance-free, brushless DC servo motors<br>InPack-Technology
+
−
|-
+
−
| Laser Design
+
−
| Sealed-Off CO2 laser<br> from 40 - 120 Watt
+
 
|-
 
|-
 
| Weight
 
| Weight
−
| Approx. 300kg (depending on laser power)
+
| Approx. ?kg
 +
| Approx. ?kg
 
|}
 
|}
  
−
===Accessories===
+
===Precaution===
−
* Focus Tool
+
−
* Cone
+
−
* Allen Key set 1.5 - 10mm
+
−
* 2 Wrenches
+
−
* Lens cleaning tissues
+
−
* Optics cleaning tissues
+
−
* AC power cord
+
  
  
−
===The lens===
+
[[File:formbytes_important_instruction.JPG| thumb |It is important to store the ABS plastic cable coil like this.]]
−
{| class="wikitable"
+
−
|-
+
−
! Colours
+
−
! Focal (mm)
+
−
! Thickness material Used
+
−
|-
+
−
| Red
+
−
| 1.5
+
−
| Very fine
+
−
|-
+
−
| Black
+
−
| 2
+
−
| Used mainly
+
−
|-
+
−
| Pink
+
−
| 2.5
+
−
| Thick
+
−
|}
+
−
[http://www.troteclaser.com/en-US/Laser-Machines/Accessories/Options/Pages/Focus-Lenses.aspx Focus Lenses for Trotec Laser Machines]
+
  
−
===Cleaning optics===
+
* Unplug electricity if not in use
−
*Do not touch directly the lens during the operation.
+
* never leave hotend heated when machine is not in use
−
*Pour on it a drop of the specific product : "Lens clens".
+
−
*Clean it with the appropriate electrostatic tissues : "Edmund Industrial Optic".
+
  
−
===Vacuum===
+
===Turning on the machine===
−
+
* Do this.
−
{| class="wikitable"
+
* Do that.
−
|-
+
* A little bit of that.
−
| Accrylic
+
* little bit of these.
−
| Not Compress Air
+
* A bit of those.
−
|-
+
* Some of that.
−
| Rubber
+
* Now this.
−
| Compress Air
+
* Then, play.
−
|-
+
−
| Wood
+
−
| Compress Air
+
−
|}
+
  
−
===Turn on the machine===
+
 
−
* Turn the key.
+
==Procedures on the machine==
−
* Clean and insert the lens in the laser head : the curved portion above.
+
===Rhino===
−
* Move the head with the arrows on the machine.
+
====Geometry====
−
* Use the focus for positionning the table.
+
* Join the geometry
−
* When the lid is closed, a light flashes at a reduced frequency.
+
[[File:Formbytes_progress_31degrees.JPG| 200 x 100 pixels]]<br><br>
−
* Turn on the vacuum, if it is necessary.
+
* Example Text.
−
* On "Job control", connect the machine and align your document with the target thanks the following commands :
+
[[File:Formbytes back to info screen.JPG| 700 × 402 pixels]]<br><br>
−
[[File:7tool.jpg|tool]]
+
* Example Text.
−
* Then, play.
+
[[File:Formbytes_prepare.JPG| 700 × 402 pixels]]<br><br>
 +
* Example Text.
 +
[[File:Formbytes_move_axis.JPG| 700 × 402 pixels]]<br><br>
 +
* Example Text.
 +
[[File:Formbytes move 0point1 mm.JPG| 500 × 202 pixels]]<br><br>
 +
[[File:Formbytes_preheat_pla.JPG| 700 × 402 pixels]]<br><br>
 +
[[File:Formbytes_print_from_sd.JPG| 700 × 402 pixels]]<br><br>
 +
[[File:Formbytes_extruder.JPG| 700 × 402 pixels]]<br><br>
 +
[[File:Formbytes_extruder_use.JPG| 700 × 402 pixels]]<br><br>
 +
[[File:Formbytes_disable_steppers.JPG| 700 × 402 pixels]]<br><br>
 +
 
 +
==Recommended Software==
 +
 
 +
[https://ultimaker.com/en/products/cura-software CURA - 3D Printing Software]
 +
 
 +
[http://www.freecadweb.org/wiki/index.php?title=Download FreeCAD - OpenSource Parametric Modelling Software]
 +
 
 +
==Website==
 +
 
 +
[http://www.formbytes.com/ Formbytes]

Revision as of 12:08, 28 April 2016

Formbytes One

FormBytes One is a professional-quality 3D printer sold in a kit easy to assemble. It is available in a fun and attractive range of colors to choose from.

Characteristics

FormBytes One v1 (2015) FormBytes One v2 (2016)
Overall dimensions (W x D x H) Approx. 28 * 31 * 43 mm Approx. 28 * 31 * 43 mm
Printing Area 150*150*100 mm 150*150*100 mm
Max. height of workpiece 100 mm 100 mm
Max. processing speed  ? cm / second, acceleration ?g  ? cm / second, acceleration ?g
Resolution 0.1 mm 0.1 mm
Accuracy Addressable accuracy: ? microm
Static repeat accuracy: < +/- ?microm 		Addressable accuracy: ? microm
Static repeat accuracy: < +/- ?microm
Weight Approx. ?kg Approx. ?kg

Precaution

It is important to store the ABS plastic cable coil like this.
  • Unplug electricity if not in use
  • never leave hotend heated when machine is not in use

Turning on the machine

  • Do this.
  • Do that.
  • A little bit of that.
  • little bit of these.
  • A bit of those.
  • Some of that.
  • Now this.
  • Then, play.


Procedures on the machine

Rhino

Geometry

  • Join the geometry

200 x 100 pixels

  • Example Text.

700 × 402 pixels

  • Example Text.

700 × 402 pixels

  • Example Text.

700 × 402 pixels

  • Example Text.

500 × 202 pixels

700 × 402 pixels

700 × 402 pixels

700 × 402 pixels

700 × 402 pixels

700 × 402 pixels

Recommended Software

CURA - 3D Printing Software

FreeCAD - OpenSource Parametric Modelling Software

Website

Formbytes

Retrieved from "https://wiki.fablabbcn.org/index.php?title=Formbytes&oldid=8055"