Difference between revisions of "Hitachi C8FSHE Slide Compound Miter Saw"

From Fab Lab Bcn WIKI
Jump to: navigation, search
(Created page with "Category:Hand tools Hitachi C8FSHE Slide Compound Miter Saw Hitachi C8FSHE Slide Compound Miter Saw External link: http://www.hitac...")
 
 
(5 intermediate revisions by 3 users not shown)
Line 3: Line 3:
 
[[File:Hitachi-C8FSHE.png| thumb |Hitachi C8FSHE Slide Compound Miter Saw]]
 
[[File:Hitachi-C8FSHE.png| thumb |Hitachi C8FSHE Slide Compound Miter Saw]]
  
Hitachi C8FSHE Slide Compound Miter Saw
+
A miter saw is a saw used to make accurate crosscuts and miters in a workpiece by pulling a large backsaw or a mounted circular saw blade down onto a board in a quick motion. It is commonly used for cutting of molding, trim and small boards.
  
External link:
+
The workpiece is held against a fence, which provides a precise cutting angle between the plane of the blade and the plane of the longest workpiece edge. In standard position, this angle is fixed at 90°
  
http://www.hitachi-koki.com/powertools/products/saw/c8fshe/c8fshe.html
+
It's possible to move the base in precise one-degree incremental changes or also provide "stops" that allow the miter index to be quickly set to common angles (such as 15°, 22.5°, 30°, and 45°)
  
 +
==Safety==
 +
*Always use safety glasses
 +
*Respect the safety distance limit between the hand and the blade as indicated on the machine
 +
*If the piece of wood to cut is small, use another machine is this is one is not suitable for small parts.
 +
*Let the blade come to a complete stop at the end of each cut before lifting it.
  
The Circular sawCompound saw offers wider cross-cuts, enhanced alignment and smooth glide for the life of the tool. The Bosch miter saw's 15 Amp motor delivers no-load speeds of 3,800 RPM for quick, accurate cuts in many materials. For added convenience and versatility, the saw is compatible with a variety of 12 In. blades and it has a clear lower guard to provide unobstructed cut-line visibility. The GCM12SD provides easy adjustments with upfront bevel and miter controls and detents at common angles. The saw's all-metal bevel lock lever and range selector are located up front to make bevel adjustments easy.
+
==How to use==
 +
 
 +
*Push the wood against the metal bar.  
 +
*Mark a line with pencil on the material where you want to cut.  
 +
*Ensure the blade fall on the side of the line and not along the center.
 +
*Start cutting the material from the back (closest side to your body), go down and continue forward.
 +
*You can adjust two different angles. the angle of the base or the angle of the blade
 +
*You can use the laser light to check for the line of cut.
 +
 
 +
 
 +
==External link==
 +
 
 +
http://www.hitachi-koki.com/powertools/products/saw/c8fshe/c8fshe.html

Latest revision as of 11:39, 27 April 2020

Hitachi C8FSHE Slide Compound Miter Saw

A miter saw is a saw used to make accurate crosscuts and miters in a workpiece by pulling a large backsaw or a mounted circular saw blade down onto a board in a quick motion. It is commonly used for cutting of molding, trim and small boards.

The workpiece is held against a fence, which provides a precise cutting angle between the plane of the blade and the plane of the longest workpiece edge. In standard position, this angle is fixed at 90°

It's possible to move the base in precise one-degree incremental changes or also provide "stops" that allow the miter index to be quickly set to common angles (such as 15°, 22.5°, 30°, and 45°)

Safety

  • Always use safety glasses
  • Respect the safety distance limit between the hand and the blade as indicated on the machine
  • If the piece of wood to cut is small, use another machine is this is one is not suitable for small parts.
  • Let the blade come to a complete stop at the end of each cut before lifting it.

How to use

  • Push the wood against the metal bar.
  • Mark a line with pencil on the material where you want to cut.
  • Ensure the blade fall on the side of the line and not along the center.
  • Start cutting the material from the back (closest side to your body), go down and continue forward.
  • You can adjust two different angles. the angle of the base or the angle of the blade
  • You can use the laser light to check for the line of cut.


External link

http://www.hitachi-koki.com/powertools/products/saw/c8fshe/c8fshe.html