Difference between revisions of "IModela"

From Fab Lab Bcn WIKI
Jump to: navigation, search
(Controlling the Z-zero via software.)
Line 4: Line 4:
 
=== Controlling the Z-zero via software. ===
 
=== Controlling the Z-zero via software. ===
 
*You can set the Z-zero on the 3D settings pop-up menu ''fab/make_png_rml/3D settings/''
 
*You can set the Z-zero on the 3D settings pop-up menu ''fab/make_png_rml/3D settings/''
*Roland documentation on the RML format for expanding the machine functionality. [[File:RML1 Command GuideENVer100.pdf]]
+
*Roland documentation on the RML format for expanding the machine functionality defined in "fabmodules/path_rml.c". [[File:RML1 Command GuideENVer100.pdf]]
  
 
[[Category:Machines]]
 
[[Category:Machines]]

Revision as of 22:31, 9 August 2011

This page is about the new Roland iModela desktop cnc milling machine.

iModela and FabModules

Controlling the Z-zero via software.

  • You can set the Z-zero on the 3D settings pop-up menu fab/make_png_rml/3D settings/
  • Roland documentation on the RML format for expanding the machine functionality defined in "fabmodules/path_rml.c". File:RML1 Command GuideENVer100.pdf