Difference between revisions of "Makita DHP453 Hammer driver drill"

From Fab Lab Bcn WIKI
Jump to: navigation, search
 
(2 intermediate revisions by one user not shown)
Line 1: Line 1:
 
[[Category:Hand tools]]
 
[[Category:Hand tools]]
 
+
__NOTOC__
 
[[File:Makita-BHP453.png| thumb |Makita DHP453 Hammer driver drill]]
 
[[File:Makita-BHP453.png| thumb |Makita DHP453 Hammer driver drill]]
  
Makita DHP453 Hammer driver drill
+
'''Description:'''
 +
 
 +
A driver drill is a tool primarily used for making round holes or driving fasteners. It is fitted with a bit, either a drill or driver, depending on application, secured by a chuck. It also includes a hammer function.
 +
 
 +
A cordless drill is an electric drill which uses rechargeable batteries. They are available in the hammer drill configuration and most have a clutch, which aids in driving screws into various substrates while not damaging them.
  
 
==How to use==
 
==How to use==
 +
*Choose the correct drill bit.
 +
*Fit the drill bit firmly into the chuck. You may be able to do this by hand.
 +
*Hold the drill steady and push it into the material you're drilling. If it takes more than light force to drill the hole, you're probably using the wrong bit.
 +
*Adjust the clutch. Each drill has a twistable collar to adjust the torque. The higher the number, the more torque (rotational force) the drill will apply.
 +
*Avoid overheating the drill bit.
 +
*If the battery is too low, swap it with a spare battery pack.
  
*Drill and screwdriver,
+
==Features==
 +
*Drill and screwdriver
 
*Two speeds, less speed more power, more speed less power
 
*Two speeds, less speed more power, more speed less power
 
*Gear number:
 
*Gear number:
 
** High number (14) more pressure and power
 
** High number (14) more pressure and power
** Low number (1) less power for not damage the material when you reach the surface
+
** Low number (1) less power for not damage the material when you break the bottom surface
 
*Screw position
 
*Screw position
*Hammer position, not just spin (not for metal and wood)
+
*Hammer position, not just spin (used for concrete and not for metal and wood)
 
+
  
 
==Drills==
 
==Drills==
  
 +
Using a bit made from the wrong material can cause the bit or the material you're drilling to break. You can use a general-purpose bit on most wood; a masonry bit for stone, brick or concrete; an HSS (high speed steel) bit on most metals
 
[[File:Drills.png]]
 
[[File:Drills.png]]
 
==Screw==
 
==Screw==

Latest revision as of 11:15, 27 April 2020

Makita DHP453 Hammer driver drill

Description:

A driver drill is a tool primarily used for making round holes or driving fasteners. It is fitted with a bit, either a drill or driver, depending on application, secured by a chuck. It also includes a hammer function.

A cordless drill is an electric drill which uses rechargeable batteries. They are available in the hammer drill configuration and most have a clutch, which aids in driving screws into various substrates while not damaging them.

How to use

  • Choose the correct drill bit.
  • Fit the drill bit firmly into the chuck. You may be able to do this by hand.
  • Hold the drill steady and push it into the material you're drilling. If it takes more than light force to drill the hole, you're probably using the wrong bit.
  • Adjust the clutch. Each drill has a twistable collar to adjust the torque. The higher the number, the more torque (rotational force) the drill will apply.
  • Avoid overheating the drill bit.
  • If the battery is too low, swap it with a spare battery pack.

Features

  • Drill and screwdriver
  • Two speeds, less speed more power, more speed less power
  • Gear number:
    • High number (14) more pressure and power
    • Low number (1) less power for not damage the material when you break the bottom surface
  • Screw position
  • Hammer position, not just spin (used for concrete and not for metal and wood)

Drills

Using a bit made from the wrong material can cause the bit or the material you're drilling to break. You can use a general-purpose bit on most wood; a masonry bit for stone, brick or concrete; an HSS (high speed steel) bit on most metals Drills.png

Screw

Screws.png

External link

http://www.makitauk.com/products/front/?model=BHP453Z