Difference between revisions of "Makita DTD146 Cordless impact driver"

From Fab Lab Bcn WIKI
Jump to: navigation, search
Line 13: Line 13:
 
*With hard wood or thin wood use the countersink bit to make the hole to hide the head of the screw, if you don’t the wood can split
 
*With hard wood or thin wood use the countersink bit to make the hole to hide the head of the screw, if you don’t the wood can split
  
 +
 +
==Screw==
 +
[[File:Screws.png]]
  
 
==External link==
 
==External link==
  
 
http://www.makita.my/products/btd146rfe-cordless-impact-driver/
 
http://www.makita.my/products/btd146rfe-cordless-impact-driver/

Revision as of 14:51, 23 March 2020

Makita DTD146 Cordless impact driver

Makita DTD146 Cordless impact driver

How to use

  • Good for screw
  • More powerful
  • When you screw you need to push the board down
  • If you can't use the clamp, Can mark the wood with a nail or trim a hole.
  • With hard wood or thin wood use the countersink bit to make the hole to hide the head of the screw, if you don’t the wood can split


Screw

Screws.png

External link

http://www.makita.my/products/btd146rfe-cordless-impact-driver/