Difference between revisions of "Multicam Laser Cutter"
From Fab Lab Bcn WIKI
| Line 26: | Line 26: | ||
*Turn on the the main compressor (main switch on the front wall of the lab, small box with two smal blue caps). | *Turn on the the main compressor (main switch on the front wall of the lab, small box with two smal blue caps). | ||
| − | [[File:Multicam_buttons_md.png|frame|none|alt=the Multicam 2000 interface pannel| | + | [[File:Multicam_buttons_md.png|frame|none|alt=the Multicam 2000 interface pannel|Multicam 2000 interface pannel]] |
==Important commands== | ==Important commands== | ||
Revision as of 13:13, 17 October 2011
Contents
Technical specifications
- Technical specs here
CAM
- Cam here
Tools
- Tools here
Materials and configuration
MDF 20mm
CUT:
- Speed: 12%
- Power: 360W
Machine workflow
- Turn on the machine.
- Turn System to 'ON'.
- Turn Laser to 'ON'.
- Turn Shutter to 'OPEN'.
- Turn Mode to 'RUN'.
- Turn on the fume extraction.
- Fume collector to 'ON'.
- Turn on the the main compressor (main switch on the front wall of the lab, small box with two smal blue caps).
Multicam 2000 interface pannel
Important commands
- Important commands here
