Difference between revisions of "Precix Milling"

From Fab Lab Bcn WIKI
Jump to: navigation, search
Line 1: Line 1:
 
[[File:Machines 2.jpg| thumb |Milling machine – 3 axis Precix 11100 Series]]
 
[[File:Machines 2.jpg| thumb |Milling machine – 3 axis Precix 11100 Series]]
  
 
+
==Technical Specifications==
 +
==Health & Safety==
 
==CAM==
 
==CAM==
 
*[http://www.rhinocam.com/ Rhino Cam]  
 
*[http://www.rhinocam.com/ Rhino Cam]  
Line 37: Line 38:
 
*Grease the bushes with machine grease (at the lab), put grease in each one of the bushes by putting the tip in the nipple (see pic 1)
 
*Grease the bushes with machine grease (at the lab), put grease in each one of the bushes by putting the tip in the nipple (see pic 1)
  
 
+
==Downloads==
 
[[Category:Machines]]
 
[[Category:Machines]]

Revision as of 15:15, 22 January 2018

Milling machine – 3 axis Precix 11100 Series

Technical Specifications

Health & Safety

CAM

Machine Operation

Tools

Troubleshooting

Connection problems

From Precix Canada: Sometime ago there was a issue with automatic updates on Win XP. We had the solution below:

++++++++++++++++++++++++++++++++++++++++++++++++

Instructions to restore Samba communication between Windows XP or 7 and QNX machine, by removing KB2536276

--- From the Start menu, click Control Panel, then Add or Remove Programs.

--- Check the "Show updates" box.

--- Scroll to the bottom of the window, and locate the patch to un-install. Microsoft labels the patches here by their corresponding Knowledge base (KB) document number.

+++++++++++++++++++++++++++++++++++++++++++++++++

Maintenance

This milling machine should be checked at least once a month, when is frequently used please check it weekly

  • Keep the machine clean
  • Make sure that all the best are tight and with no broken teeth
  • Grease the bushes with machine grease (at the lab), put grease in each one of the bushes by putting the tip in the nipple (see pic 1)

Downloads