Difference between revisions of "RepRapBCN"
From Fab Lab Bcn WIKI
| Line 16: | Line 16: | ||
[[:File:Home Menu.png]] | [[:File:Home Menu.png]] | ||
| + | |||
| + | |||
| + | ==SETTING UP YOUR BCN3D+== | ||
| + | |||
| + | *Hotbed height calibration | ||
| + | |||
| + | *For a proper use, the nozzle movement must be parallel to the Hotbed Surface. | ||
| + | To achieve that, there are three screws available to calibrate its orientation. | ||
| + | There’s a risk of the nozzle hitting the hotbed glass or the first layer not sticking on its surface when decalibrated. The following steps must be followed: | ||
Revision as of 11:10, 30 August 2016
RepRapBCN
Technical specifications
- Printing Volume: Length: 252mm, Width: 200mm, Height: 200mm
LCD CONTROL
- The BCN3D+ can be operated from its LCD menu, a single button combining two movements:
- 1- Turn to move through the menu.
- 2- Click to select desired option.
- Adjacently to the control button there is an emergency red button to stop the machine in case of malfunction. It stops the printer but keeps the screen and fans on. Once pressed, the printer resets itself to resume use.
SETTING UP YOUR BCN3D+
- Hotbed height calibration
- For a proper use, the nozzle movement must be parallel to the Hotbed Surface.
To achieve that, there are three screws available to calibrate its orientation. There’s a risk of the nozzle hitting the hotbed glass or the first layer not sticking on its surface when decalibrated. The following steps must be followed:
