Difference between revisions of "Troteclaser"

From Fab Lab Bcn WIKI
Jump to: navigation, search
Line 25: Line 25:
 
[[File:4Make2D.jpg| 700 × 402 pixels]]<br><br>
 
[[File:4Make2D.jpg| 700 × 402 pixels]]<br><br>
 
*Change object layer : hairline
 
*Change object layer : hairline
[[File:Hairline.jpg| 700 × 402 pixels]]<br><br>
+
[[File:Hairline.jpg| 500 × 202 pixels]]<br><br>
[[File:4HairlineColour.jpg| 700 × 402 pixels]]<br><br>
+
[[File:4LayerColour.jpg| 700 × 402 pixels]]<br><br>
 
[[File:4ColourSelection.jpg| 700 × 402 pixels]]<br><br>
 
[[File:4ColourSelection.jpg| 700 × 402 pixels]]<br><br>
  

Revision as of 14:22, 20 March 2015


Precaution

  • Never leave the laser device unattended while the system is operating.
  • Always have a fire extinguisher available, as the laser beam can ignite flammable materials.
  • Do not put any flammanle materials in the inside of the device or in the immediate surroundings of the device.
  • Be aware of all Laser safety stickers on the machine and follow them.
  • The system must be used only by authorized and trained personnel.
  • Avoid electrostatic charging during cable connections / plug-in.
  • Do not start the Laser machine without an adequate exhaust system.
  • In case of a broken lens: avoid direct skin contact and inhaling.
  • "EMERGENCY-STOP": on any risk: LIFT THE COVER LID!

Procedures on the softwares

Rhino

Geometry

  • Join the geometry

700 × 402 pixels

  • Scale your document at the dimension of your material

700 × 402 pixels

  • SelDup your geometry to avoid a double selection

700 × 402 pixels

  • Make2D

700 × 402 pixels

  • Change object layer : hairline

500 × 202 pixels

700 × 402 pixels

700 × 402 pixels


Printing

  • Ctrl+p : Print

Job control

The Machine

Accessories

  • Focus Tool
  • Cone
  • Allen Key set 1.5 - 10mm
  • 2 Wrenches
  • Lens cleaning tissues
  • Optics cleaning tissues
  • AC power cord

The lengths

Colours Focal (mm) Thickness material Used
Red 1.5 Very fine
Black 2 Used mainly
Pink 2.5 Thick

Cleaning optics

  • Do not touch directly the length during the operation.
  • Pour on it a drop of the specific product : "Lens clens".
  • Clean it with the appropriate tissues : "Edmund Industrial Optic".

Vacuum

Accrylic Not Compress Air
Rubber Compress Air
Wood Compress Air