Difference between revisions of "Troteclaser"

From Fab Lab Bcn WIKI
Jump to: navigation, search
Line 1: Line 1:
 
[[Category:Machines]]
 
[[Category:Machines]]
  
 +
<br><br>
 
==Precaution==
 
==Precaution==
 +
<br><br>
 
* '''Never leave the laser device unattended while the system is operating.'''
 
* '''Never leave the laser device unattended while the system is operating.'''
 
* Always have a fire extinguisher available, as the laser beam can ignite flammable materials.
 
* Always have a fire extinguisher available, as the laser beam can ignite flammable materials.
Line 12: Line 14:
 
* "EMERGENCY-STOP": on any risk: LIFT THE COVER LID!
 
* "EMERGENCY-STOP": on any risk: LIFT THE COVER LID!
  
 +
<br><br>
 
==Procedures on the softwares==
 
==Procedures on the softwares==
 
+
<br><br>
 
===Rhino===
 
===Rhino===
 
====Geometry====
 
====Geometry====
 +
<br>
 
*Join the geometry
 
*Join the geometry
 
[[File:Join.jpg| 700 × 402 pixels]]<br><br>
 
[[File:Join.jpg| 700 × 402 pixels]]<br><br>
Line 35: Line 39:
  
 
====Printing====
 
====Printing====
 +
<br>
 
*Ctrl+p : Print  
 
*Ctrl+p : Print  
 
[[File:4WindowPrint.jpg| 4WindowsPrint ]]<br><br>
 
[[File:4WindowPrint.jpg| 4WindowsPrint ]]<br><br>
Line 47: Line 52:
 
*Set the view
 
*Set the view
 
[[File:Settheview.jpg|Set the view]]<br><br>
 
[[File:Settheview.jpg|Set the view]]<br><br>
**Drag the square to define your print window
+
*Drag the square to define your print window
 
[[File:PrintWindow.jpg|Print Window]]<br><br>
 
[[File:PrintWindow.jpg|Print Window]]<br><br>
 +
*Clic on print
  
 
===Job control===
 
===Job control===
 
+
<br>
 +
*Selection of your file
 +
[[File:Selection.jpg|Selection]]<br><br>
  
  

Revision as of 17:10, 20 March 2015




Precaution



  • Never leave the laser device unattended while the system is operating.
  • Always have a fire extinguisher available, as the laser beam can ignite flammable materials.
  • Do not put any flammanle materials in the inside of the device or in the immediate surroundings of the device.
  • Be aware of all Laser safety stickers on the machine and follow them.
  • The system must be used only by authorized and trained personnel.
  • Avoid electrostatic charging during cable connections / plug-in.
  • Do not start the Laser machine without an adequate exhaust system.
  • In case of a broken lens: avoid direct skin contact and inhaling.
  • "EMERGENCY-STOP": on any risk: LIFT THE COVER LID!



Procedures on the softwares



Rhino

Geometry


  • Join the geometry

700 × 402 pixels

  • Check the scale of the drawing , make sure you are in millimeters and that your material fits in the laser.

700 × 402 pixels

  • Seldup command selects duplicate lines. Keep in mind that is there are more than one lines the laser cutter will pass more times over the same place.

700 × 402 pixels

  • Make2d if you import your drawing from other programs other than rhino and to make sure that everything is on 0 in Z plane.

700 × 402 pixels

  • Change object layer : hairline

500 × 202 pixels

700 × 402 pixels

700 × 402 pixels
Engrave
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut



Printing


  • Ctrl+p : Print

4WindowsPrint

  • Properties

700 × 402 pixels

700 × 402 pixels

  • Material Database

Material

  • Process options

Process options

Valid

  • Set the view

Set the view

  • Drag the square to define your print window

Print Window

  • Clic on print

Job control


  • Selection of your file

Selection


The Machine

Accessories

  • Focus Tool
  • Cone
  • Allen Key set 1.5 - 10mm
  • 2 Wrenches
  • Lens cleaning tissues
  • Optics cleaning tissues
  • AC power cord

The lengths

Colours Focal (mm) Thickness material Used
Red 1.5 Very fine
Black 2 Used mainly
Pink 2.5 Thick

Cleaning optics

  • Do not touch directly the lens during the operation.
  • Pour on it a drop of the specific product : "Lens clens".
  • Clean it with the appropriate electrostatic tissues : "Edmund Industrial Optic".

Vacuum

Accrylic Not Compress Air
Rubber Compress Air
Wood Compress Air