Difference between revisions of "Troteclaser"

From Fab Lab Bcn WIKI
Jump to: navigation, search
Line 13: Line 13:
 
* "EMERGENCY-STOP": on any risk: LIFT THE COVER LID!
 
* "EMERGENCY-STOP": on any risk: LIFT THE COVER LID!
 
<br>
 
<br>
 
+
[http://wiki.fablabbcn.org/Material Material Laser Cut]
 +
<br>
 
==Procedures on the softwares==
 
==Procedures on the softwares==
 
===Rhino===
 
===Rhino===

Revision as of 18:47, 20 March 2015


Precaution

  • Never leave the laser device unattended while the system is operating.
  • Always have a fire extinguisher available, as the laser beam can ignite flammable materials.
  • Do not put any flammanle materials in the inside of the device or in the immediate surroundings of the device.
  • Be aware of all Laser safety stickers on the machine and follow them.
  • The system must be used only by authorized and trained personnel.
  • Avoid electrostatic charging during cable connections / plug-in.
  • Do not start the Laser machine without an adequate exhaust system.
  • In case of a broken lens: avoid direct skin contact and inhaling.
  • "EMERGENCY-STOP": on any risk: LIFT THE COVER LID!


Material Laser Cut

Procedures on the softwares

Rhino

Geometry

  • Join the geometry

700 × 402 pixels

  • Check the scale of the drawing , make sure you are in millimeters and that your material fits in the laser.

700 × 402 pixels

  • Seldup command selects duplicate lines. Keep in mind that is there are more than one lines the laser cutter will pass more times over the same place.

700 × 402 pixels

  • Make2d if you import your drawing from other programs other than rhino and to make sure that everything is on 0 in Z plane.

700 × 402 pixels

  • Change object layer : hairline

500 × 202 pixels

700 × 402 pixels

700 × 402 pixels
Engrave
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut
Cut


Printing

  • Ctrl+p : Print

4WindowsPrint

  • Properties

700 × 402 pixels

700 × 402 pixels

  • Material Database

Material

  • Process options

Process options

Valid

  • Set the view

Set the view

  • Drag the square to define your print window

Print Window

  • Clic on print


Job control

  • Selection of your file

Selection




The Machine : Trotec Speedy 400

Operation Manual

Characteristics

Overall dimensions (W x D x H) 1400 * 950 * 1070 mm
Working area 1000 * 610 mm
Max. height of workpiece 305 mm
Max. processing speed 355 cm / second, acceleration 4g
Accuracy Addressable accuracy: 5 microm
Static repeat accuracy: < +/- 15microm
Mechanical design Fully enclosed chassis with double safety interlock system laser safety class,
CE coñpliant maintenance-free, brushless DC servo motors
InPack-Technology
Laser Design Sealed-Off CO2 laser
from 40 - 120 Watt
Weight Approx. 300kg (depending on laser power)

Accessories

  • Focus Tool
  • Cone
  • Allen Key set 1.5 - 10mm
  • 2 Wrenches
  • Lens cleaning tissues
  • Optics cleaning tissues
  • AC power cord


The lens

Colours Focal (mm) Thickness material Used
Red 1.5 Very fine
Black 2 Used mainly
Pink 2.5 Thick

Cleaning optics

  • Do not touch directly the lens during the operation.
  • Pour on it a drop of the specific product : "Lens clens".
  • Clean it with the appropriate electrostatic tissues : "Edmund Industrial Optic".

Vacuum

Accrylic Not Compress Air
Rubber Compress Air
Wood Compress Air

Turn on the machine

  • Turn the key.
  • Clean and insert the lens in the laser head : the curved portion above.
  • Move the head with the arrows on the machine.
  • Use the focus for positionning the table.
  • When the lid is closed, a light flashes at a reduced frequency.
  • Turn on the vacuum, if it is necessary.
  • On "Job control", connect the machine and align your document with the target thanks the following commands :
tool
  • Then, play.