Difference between revisions of "Troteclaser"
From Fab Lab Bcn WIKI
| Line 16: | Line 16: | ||
===Rhino=== | ===Rhino=== | ||
*Join the geometry | *Join the geometry | ||
| − | [[File:Join.jpg| 800 × 502 pixels]] | + | [[File:Join.jpg| 800 × 502 pixels]]<br> |
| − | + | ||
*Scale your document at the dimension of your material | *Scale your document at the dimension of your material | ||
| + | [[File:Join.jpg| 800 × 502 pixels]]<br> | ||
*SelDup your geometry to avoid a double selection | *SelDup your geometry to avoid a double selection | ||
| + | [[File:Join.jpg| 800 × 502 pixels]]<br> | ||
*Change object layer : hairline | *Change object layer : hairline | ||
| + | |||
*Ctrl+p : Print | *Ctrl+p : Print | ||
| Line 64: | Line 66: | ||
===Vacuum=== | ===Vacuum=== | ||
| + | |||
| + | {| class="wikitable" | ||
| + | |- | ||
| + | | Accrylic | ||
| + | | Not Compress Air | ||
| + | |- | ||
| + | | Rubber | ||
| + | | Compress Air | ||
| + | |- | ||
| + | | Wood | ||
| + | | Compress Air | ||
| + | |} | ||
Revision as of 13:48, 20 March 2015
Contents
Precaution
- Never leave the laser device unattended while the system is operating.
- Always have a fire extinguisher available, as the laser beam can ignite flammable materials.
- Do not put any flammanle materials in the inside of the device or in the immediate surroundings of the device.
- Be aware of all Laser safety stickers on the machine and follow them.
- The system must be used only by authorized and trained personnel.
- Avoid electrostatic charging during cable connections / plug-in.
- Do not start the Laser machine without an adequate exhaust system.
- In case of a broken lens: avoid direct skin contact and inhaling.
- "EMERGENCY-STOP": on any risk: LIFT THE COVER LID!
Procedures on the softwares
Rhino
- Join the geometry
- Scale your document at the dimension of your material
- SelDup your geometry to avoid a double selection
- Change object layer : hairline
- Ctrl+p : Print
Job control
The Machine
Accessories
- Focus Tool
- Cone
- Allen Key set 1.5 - 10mm
- 2 Wrenches
- Lens cleaning tissues
- Optics cleaning tissues
- AC power cord
The lengths
| Colours | Focal (mm) | Thickness material Used |
|---|---|---|
| Red | 1.5 | Very fine |
| Black | 2 | Used mainly |
| Pink | 2.5 | Thick |
Cleaning optics
- Do not touch directly the length during the operation.
- Pour on it a drop of the specific product : "Lens clens".
- Clean it with the appropriate tissues : "Edmund Industrial Optic".
Vacuum
| Accrylic | Not Compress Air |
| Rubber | Compress Air |
| Wood | Compress Air |
