Difference between revisions of "Troteclaser"
From Fab Lab Bcn WIKI
| (32 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| − | [[Category:Machines]] | + | [[Category:Old Machines]] |
| + | |||
| + | [[File:Machines 8.jpg| thumb |Laser cutter Trotec Speedy 400]] | ||
==Precaution== | ==Precaution== | ||
| + | |||
* '''Never leave the laser device unattended while the system is operating.''' | * '''Never leave the laser device unattended while the system is operating.''' | ||
* Always have a fire extinguisher available, as the laser beam can ignite flammable materials. | * Always have a fire extinguisher available, as the laser beam can ignite flammable materials. | ||
| Line 11: | Line 14: | ||
* In case of a broken lens: avoid direct skin contact and inhaling. | * In case of a broken lens: avoid direct skin contact and inhaling. | ||
* "EMERGENCY-STOP": on any risk: LIFT THE COVER LID! | * "EMERGENCY-STOP": on any risk: LIFT THE COVER LID! | ||
| − | + | <br> | |
| + | [http://wiki.fablabbcn.org/Material_laser Material Laser Cut] | ||
| + | <br> | ||
| + | <br> | ||
==Procedures on the softwares== | ==Procedures on the softwares== | ||
| − | |||
===Rhino=== | ===Rhino=== | ||
====Geometry==== | ====Geometry==== | ||
| − | *Join the geometry | + | * Join the geometry |
[[File:Join.jpg| 700 × 402 pixels]]<br><br> | [[File:Join.jpg| 700 × 402 pixels]]<br><br> | ||
| − | *Check the scale of the drawing , make sure you are in millimeters and that your material fits in the laser. | + | * Check the scale of the drawing , make sure you are in millimeters and that your material fits in the laser. |
[[File:Scale.jpg| 700 × 402 pixels]]<br><br> | [[File:Scale.jpg| 700 × 402 pixels]]<br><br> | ||
| − | *Seldup command selects duplicate lines. Keep in mind that is there are more than one lines the laser cutter will pass more times over the same place. | + | * Seldup command selects duplicate lines. Keep in mind that is there are more than one lines the laser cutter will pass more times over the same place. |
[[File:3SelDup.jpg| 700 × 402 pixels]]<br><br> | [[File:3SelDup.jpg| 700 × 402 pixels]]<br><br> | ||
| − | *Make2d if you import your drawing from other programs other than rhino and to make sure that everything is on 0 in Z plane. | + | * Make2d if you import your drawing from other programs other than rhino and to make sure that everything is on 0 in Z plane. |
[[File:4Make2D.jpg| 700 × 402 pixels]]<br><br> | [[File:4Make2D.jpg| 700 × 402 pixels]]<br><br> | ||
| − | *Change object layer : hairline | + | * Change object layer : hairline |
[[File:Hairline.jpg| 500 × 202 pixels]]<br><br> | [[File:Hairline.jpg| 500 × 202 pixels]]<br><br> | ||
[[File:4LayersColour.jpg| 700 × 402 pixels]]<br><br> | [[File:4LayersColour.jpg| 700 × 402 pixels]]<br><br> | ||
| Line 30: | Line 35: | ||
|-valign="top" | |-valign="top" | ||
|[[File:4ColourSelection.jpg| 700 × 402 pixels]] | |[[File:4ColourSelection.jpg| 700 × 402 pixels]] | ||
| − | |< | + | |<br>Engrave <br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut<br>Cut |
|} | |} | ||
| − | + | <br> | |
====Printing==== | ====Printing==== | ||
| − | *Ctrl+p : Print | + | * Ctrl+p : Print |
| − | [[File: | + | [[File:4WindowPrint.jpg| 4WindowsPrint ]]<br><br> |
| − | *Properties | + | * Properties |
[[File:5Print.jpg| 700 × 402 pixels]]<br><br> | [[File:5Print.jpg| 700 × 402 pixels]]<br><br> | ||
| − | + | [[File:5Preference.jpg| 700 × 402 pixels]]<br><br> | |
| − | + | * Material Database | |
| − | + | [[File:5MaterialDataBase.jpg|Material]]<br><br> | |
| + | *Process options | ||
| + | [[File:5Process options.jpg|Process options]]<br><br> | ||
| + | [[File:5Valid.jpg|Valid]]<br><br> | ||
| + | * Set the view | ||
| + | [[File:Settheview.jpg|Set the view]]<br><br> | ||
| + | * Drag the square to define your print window | ||
| + | [[File:PrintWindow.jpg|Print Window]]<br><br> | ||
| + | * Press enter and once you come back to the previous screen clic on print. | ||
| + | <br> | ||
===Job control=== | ===Job control=== | ||
| + | [http://www.troteclaser.com/en-US/Support/Documents/JobControl-Manual-EN.pdf JobControl Manual] | ||
| + | <br> | ||
| + | * Selection of your file | ||
| + | [[File:Selection.jpg|Selection]]<br><br> | ||
| + | <br><br><br> | ||
| + | ==The Machine : Trotec Speedy 400== | ||
| + | [http://www.troteclaser.com/en-US/Support/Documents/Speedy-300-Manual-EN.pdf Operation Manual] | ||
| + | ===Characteristics=== | ||
| + | {| class="wikitable" | ||
| + | |- | ||
| + | | Overall dimensions (W x D x H) | ||
| + | | 1400 * 950 * 1070 mm | ||
| + | |- | ||
| + | | Working area | ||
| + | | 1000 * 610 mm | ||
| + | |- | ||
| + | | Max. height of workpiece | ||
| + | | 305 mm | ||
| + | |- | ||
| + | | Max. processing speed | ||
| + | | 355 cm / second, acceleration 4g | ||
| + | |- | ||
| + | | Accuracy | ||
| + | | Addressable accuracy: 5 microm<br> Static repeat accuracy: < +/- 15microm | ||
| + | |- | ||
| + | | Mechanical design | ||
| + | | Fully enclosed chassis with double safety interlock system laser safety class, <br>CE coñpliant maintenance-free, brushless DC servo motors<br>InPack-Technology | ||
| + | |- | ||
| + | | Laser Design | ||
| + | | Sealed-Off CO2 laser<br> from 40 - 120 Watt | ||
| + | |- | ||
| + | | Weight | ||
| + | | Approx. 300kg (depending on laser power) | ||
| + | |} | ||
| − | |||
| − | |||
===Accessories=== | ===Accessories=== | ||
* Focus Tool | * Focus Tool | ||
| Line 57: | Line 103: | ||
* AC power cord | * AC power cord | ||
| − | ===The | + | |
| + | ===The lens=== | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
| Line 76: | Line 123: | ||
| Thick | | Thick | ||
|} | |} | ||
| + | [http://www.troteclaser.com/en-US/Laser-Machines/Accessories/Options/Pages/Focus-Lenses.aspx Focus Lenses for Trotec Laser Machines] | ||
===Cleaning optics=== | ===Cleaning optics=== | ||
| Line 95: | Line 143: | ||
| Compress Air | | Compress Air | ||
|} | |} | ||
| + | |||
| + | ===Turn on the machine=== | ||
| + | * Turn the key. | ||
| + | * Clean and insert the lens in the laser head : the curved portion above. | ||
| + | * Move the head with the arrows on the machine. | ||
| + | * Use the focus for [http://bismilah.xyz/pialadunia piala dunia streaming] positionning the table. | ||
| + | * When the lid is closed, a light flashes at a reduced frequency. | ||
| + | * Turn on the vacuum, if it is necessary. | ||
| + | * On "Job control", connect the machine and align your document with the target thanks the following commands : | ||
| + | [[File:7tool.jpg|tool]] | ||
| + | * Then, play. | ||
Latest revision as of 18:46, 11 May 2018
Contents
Precaution
- Never leave the laser device unattended while the system is operating.
- Always have a fire extinguisher available, as the laser beam can ignite flammable materials.
- Do not put any flammanle materials in the inside of the device or in the immediate surroundings of the device.
- Be aware of all Laser safety stickers on the machine and follow them.
- The system must be used only by authorized and trained personnel.
- Avoid electrostatic charging during cable connections / plug-in.
- Do not start the Laser machine without an adequate exhaust system.
- In case of a broken lens: avoid direct skin contact and inhaling.
- "EMERGENCY-STOP": on any risk: LIFT THE COVER LID!
Procedures on the softwares
Rhino
Geometry
- Join the geometry
- Check the scale of the drawing , make sure you are in millimeters and that your material fits in the laser.
- Seldup command selects duplicate lines. Keep in mind that is there are more than one lines the laser cutter will pass more times over the same place.
- Make2d if you import your drawing from other programs other than rhino and to make sure that everything is on 0 in Z plane.
- Change object layer : hairline
|
Engrave Cut Cut Cut Cut Cut Cut Cut Cut Cut Cut Cut Cut Cut Cut Cut Cut Cut Cut |
Printing
- Ctrl+p : Print
- Properties
- Material Database
- Process options
- Set the view
- Drag the square to define your print window
- Press enter and once you come back to the previous screen clic on print.
Job control
- Selection of your file
The Machine : Trotec Speedy 400
Characteristics
| Overall dimensions (W x D x H) | 1400 * 950 * 1070 mm |
| Working area | 1000 * 610 mm |
| Max. height of workpiece | 305 mm |
| Max. processing speed | 355 cm / second, acceleration 4g |
| Accuracy | Addressable accuracy: 5 microm Static repeat accuracy: < +/- 15microm |
| Mechanical design | Fully enclosed chassis with double safety interlock system laser safety class, CE coñpliant maintenance-free, brushless DC servo motors InPack-Technology |
| Laser Design | Sealed-Off CO2 laser from 40 - 120 Watt |
| Weight | Approx. 300kg (depending on laser power) |
Accessories
- Focus Tool
- Cone
- Allen Key set 1.5 - 10mm
- 2 Wrenches
- Lens cleaning tissues
- Optics cleaning tissues
- AC power cord
The lens
| Colours | Focal (mm) | Thickness material Used |
|---|---|---|
| Red | 1.5 | Very fine |
| Black | 2 | Used mainly |
| Pink | 2.5 | Thick |
Focus Lenses for Trotec Laser Machines
Cleaning optics
- Do not touch directly the lens during the operation.
- Pour on it a drop of the specific product : "Lens clens".
- Clean it with the appropriate electrostatic tissues : "Edmund Industrial Optic".
Vacuum
| Accrylic | Not Compress Air |
| Rubber | Compress Air |
| Wood | Compress Air |
Turn on the machine
- Turn the key.
- Clean and insert the lens in the laser head : the curved portion above.
- Move the head with the arrows on the machine.
- Use the focus for piala dunia streaming positionning the table.
- When the lid is closed, a light flashes at a reduced frequency.
- Turn on the vacuum, if it is necessary.
- On "Job control", connect the machine and align your document with the target thanks the following commands :
- Then, play.
