Difference between revisions of "CNC Control"

Revision as of 00:28, 1 March 2011

This page is about resources for building computer controlled machines: Milling machines, Laser Cutters, FDM 3D Printers, etc..

CNC Controller firmwares for Arduino

Motor Drivers IC's by Allegro

Stepper Drivers by Allegro IC's

Stepper Driver boards based on the Allegro 3982 / 3977

@@ Line 4: / Line 4: @@
 === Firmware ===
+CNC Controller firmwares for Arduino
+*http://dank.bengler.no/-/page/show/5470_grbl
 === Motor Drivers ===
+Motor Drivers IC's by Allegro
+*http://www.allegromicro.com/en/Products/Categories/ICs/motor.asp
+Stepper Drivers by Allegro IC's
+*http://www.allegromicro.com/en/Products/Part_Numbers/3982/
+*http://www.allegromicro.com/en/Products/Part_Numbers/3977/
+Stepper Driver boards based on the Allegro 3982 / 3977
 *http://makeyourbot.org/a3982-1-0
+*http://reprap.org/wiki/Stepper_Motor_Driver_2.3
 *http://store.makerbot.com/electronics/assembled-electronics/stepper-driver-v2-3-fully-assembled.html
 *http://schmalzhaus.com/EasyDriver/
+*http://www.schmalzhaus.com/EasyDriverQuad/index.html
 === Motors ===
+*Stepper Motors (up to NEMA 34) http://www.linengineering.com/line/contents/stepmotors/
 === Interesting Projects ===