Difference between revisions of "Arduino Smart Plug Shield"
(→Similar shields) |
(→Current and voltage metering options) |
||
| Line 27: | Line 27: | ||
*http://openenergymonitor.org/emon/emontx | *http://openenergymonitor.org/emon/emontx | ||
| − | == Current and voltage | + | == Current and voltage measurement options == |
Non-invasive AC external current sensor clamp + 9V Power adapter + Rectifier circuit | Non-invasive AC external current sensor clamp + 9V Power adapter + Rectifier circuit | ||
* http://openenergymonitor.org/emon/node/58 | * http://openenergymonitor.org/emon/node/58 | ||
Revision as of 12:22, 3 August 2011
This page is the development documentation platform of the Smart Plug Shield for Arduino.
Contents
Parent Projects
Design requirements
- Precise, easy calibration, reduced size, Current and Voltage measuring system
- Modular communication module: XBEE (jNode?, Etherner?, CAN?)
- Load ON/OFF or dimmer (10-12A Triac)
- Integrated 220V to 9V-5V power supply (ex. 220 to USB chargers)
- Optional: RGB LED / LCD for feedback
Similar shields
Arduino Energy Shield
XBEE + RTC + ADE7753 (power calculation to serial comunication) + 1 Clamp input + 1 Transformer input. The current is mesured with a non-invasive AC external current sensor and the voltage with an external 12V adaptor.
SEG meter
XBEE + 6 Clamp input + 1 Transformer input The current is mesured with a non-invasive AC external current sensor and the voltage with an external 12V adaptor.
CuteDigi Smart Outlet LCD Shield
ACS712 (current mesuring) + 16A TRIAC (switch) + LCD + 2 buttons interface The current is mesured with an invasive IC (ACS712). No voltage measuring?
emonTX (not a shield, standalone)
Current and voltage measurement options
Non-invasive AC external current sensor clamp + 9V Power adapter + Rectifier circuit
Non-invasive AC external current sensor clamp + 12V Power adapter + dedicated dsp chip (ADE7753)
Invasive current mesurement IC ACS712
Invasive current mesurement with OP-AMP (the kill-a-watt method)
