Arduino Smart Plug Shield

This page is the documentation platform for development of the Smart Plug Shield for Arduino.

Parent Projects

• http://openenergymonitor.org/emon/input

Similar shields

Arduino Energy Shield

XBEE + RTC + ADE7753 (power calculation to serial comunication) + 1 Clamp input + 1 Transformer input. The current is mesured with a non-invasive AC external current sensor and the voltage with an external 12V adaptor.

• http://www.olimex.cl/product_info.php?products_id=797

SEG meter

XBEE + 6 Clamp input + 1 Transformer input The current is mesured with a non-invasive AC external current sensor and the voltage with an external 12V adaptor.

• http://smartenergygroups.com/samotage/posts/72-The-SEGmeter-specification

CuteDigi Smart Outlet LCD Shield

ACS712 (current mesuring) + 16A TRIAC (switch) + LCD + 2 buttons interface The current is mesured with an invasive IC (ACS712). No voltage mesuring?

• http://www.cutedigi.com/index.php?cPath=313

Current and voltage metering options

Non-invasive AC external current sensor clamp + 9V Power adapter + Rectifier circuit

• http://openenergymonitor.org/emon/node/58

Non-invasive AC external current sensor clamp + 12V Power adapter + dedicated dsp chip (ADE7753)

• http://www.olimex.cl/pdf/Main_Sch.pdf

Invasive current mesurement IC ACS712

• http://www.sparkfun.com/products/8883
• http://www.cutedigi.com/pub/Arduino/Arduino_Smart_Outlet.pdf

Invasive current mesurement with OP-AMP (the kill-a-watt method)

• http://compendiumarcana.com/kaw/kaw3.zip (eagles)