ZCorp

Technical specifications

• Printable volume: 250mm, 350mm, 200mm (width, depth, height).

CAM

• Cam here

Tools

• Tools here

Materials and configuration

• Materials and configuration here

Machine workflow

• Turn on the computer.
• Turn on the machine.
• Check the binder level. Fill all four tanks with binder at least over the binder extraction pipes at the back side of the tanks. Don't fill them too much since the binder ages in the tank.
• Close the caps softly, don't apply pressure.
• Prepare the printing bed.

1.Take the machine offline pressing the 'online' button. 2.Open the machine hood. 3.Move down the material container pressing the left down arrow button and fill it with printing powder.

Important commands

• Important commands here

External links

• External links here