Troteclaser

Precaution

• Never leave the laser device unattended while the system is operating.
• Always have a fire extinguisher available, as the laser beam can ignite flammable materials.
• Do not put any flammanle materials in the inside of the device or in the immediate surroundings of the device.
• Be aware of all Laser safety stickers on the machine and follow them.
• The system must be used only by authorized and trained personnel.
• Avoid electrostatic charging during cable connections / plug-in.
• Do not start the Laser machine without an adequate exhaust system.
• In case of a broken lens: avoid direct skin contact and inhaling.
• "EMERGENCY-STOP": on any risk: LIFT THE COVER LID!

Procedures on the softwares

Rhino

• Join the geometry

• Scale your document at the dimension of your material
• SelDup your geometry to avoid a double selection
• Change object layer : hairline
• Ctrl+p : Print

The Machine

Accessories

• Focus Tool
• Cone
• Allen Key set 1.5 - 10mm
• 2 Wrenches
• Lens cleaning tissues
• Optics cleaning tissues
• AC power cord

The lengths

Colours	Focal (mm)	Thickness material Used
Red	1.5	Very fine
Black	2	Used mainly
Pink	2.5	Thick

Cleaning optics

• Do not touch directly the length during the operation.
• Pour on it a drop of the specific product : "Lens clens".
• Clean it with the appropriate tissues : "Edmund Industrial Optic".