Difference between revisions of "Category:Boot Camp"
From Fab Lab Bcn WIKI
Shakirmaliq (Talk | contribs) |
|||
| (8 intermediate revisions by 3 users not shown) | |||
| Line 4: | Line 4: | ||
The Boot Camp is a short duration workshop on Fab Lab management, processes and project development. The goal of Boot Camps is to offer short term training for future Lab Managers, fabricators and creators around the world. The Boot Camp is developed by the Fab Labs in the worldwide network, provided with equipment and tutors dedicated (almost) 24/7 for an intense workshop on Digital Fabrication. | The Boot Camp is a short duration workshop on Fab Lab management, processes and project development. The goal of Boot Camps is to offer short term training for future Lab Managers, fabricators and creators around the world. The Boot Camp is developed by the Fab Labs in the worldwide network, provided with equipment and tutors dedicated (almost) 24/7 for an intense workshop on Digital Fabrication. | ||
| − | + | [https://ladangrejeki.com/ Bandar Poker Online] | [https://ladangrejeki.com/ Agen BandarQQ] | |
==Participating labs:== | ==Participating labs:== | ||
| Line 39: | Line 39: | ||
===Participants in Barcelona=== | ===Participants in Barcelona=== | ||
| − | *[[ | + | *[[User_talk:Nuriarobles|Nuria Robles, Leon]] |
| − | *[[ | + | *[[User_talk:Gustavo|Gustavo Valera, Madrid]] |
| − | *[[ | + | *[[User_talk:R.Ferrero|Ruben Ferrero, Leon]] |
| − | *[[ | + | *[[User_talk:Steijn|Steijn de Mil, Brussels]] |
| − | *[[ | + | *[[User_talk:Daniel|Daniel Pietrosemoli, Madrid]] |
| − | *[[ | + | *[[User_talk:Bernat|Bernat Cuni, Barcelona]] |
| − | *[[ | + | *[[User_talk:Santi|Santiago Ferris, Valencia]] |
===Participants in Providence=== | ===Participants in Providence=== | ||
| Line 65: | Line 65: | ||
==== 2D DESIGN TOOLS (1 hour)==== | ==== 2D DESIGN TOOLS (1 hour)==== | ||
Design software for 2D: | Design software for 2D: | ||
| − | * | + | *[[Inkscape]] |
| − | * | + | *Openoffice |
| − | * | + | *Corel Draw |
| − | * | + | *illustrator |
====2D FABRICATION TOOLS (3 hours)==== | ====2D FABRICATION TOOLS (3 hours)==== | ||
| Line 74: | Line 74: | ||
====='''[[Epilog Laser|Laser]]:'''===== | ====='''[[Epilog Laser|Laser]]:'''===== | ||
* Safety, use, maintenance , projects (2D projects) | * Safety, use, maintenance , projects (2D projects) | ||
| − | * | + | *Materials (Wood, Acrylic, Textiles, Organic Source |
| − | * | + | *Nesting and saving material |
| − | * | + | *Press-fit |
| − | * | + | *From 2D to 3D and viceversa workflow (DEMO on waffle structures) |
| − | * | + | *Raster images and bitmaps |
| − | ===== | + | =====[[ShopBot]] ===== |
(Introduction in 2D cutting use): | (Introduction in 2D cutting use): | ||
Safety, use, maintenance, projects (2D projects). | Safety, use, maintenance, projects (2D projects). | ||
| − | * | + | *Materials (Wood, Aluminum, Composites, Acrylic) |
| − | * | + | *Tool types (Diameter, Length, Blades, Shape) |
| − | * | + | *Nesting and Holdown |
====='''Vinyl Cutter:''' ===== | ====='''Vinyl Cutter:''' ===== | ||
| Line 106: | Line 106: | ||
====3D DESIGN TOOLS (3 hours)==== | ====3D DESIGN TOOLS (3 hours)==== | ||
| − | * | + | *[[Blender]] |
| − | * | + | *[[Sketchup|Sketch-up]] |
| − | * | + | *Rhino |
| − | * | + | *K3D |
====3D FABRICATION TOOLS (3 hours)==== | ====3D FABRICATION TOOLS (3 hours)==== | ||
====='''[[Roland Modela|Modela]]:''' ===== | ====='''[[Roland Modela|Modela]]:''' ===== | ||
*Safety, use, maintenance, projects (molding and casting, circuits, 2D etching) | *Safety, use, maintenance, projects (molding and casting, circuits, 2D etching) | ||
| − | ** | + | **Materials |
| − | ** | + | **Tool types (Diameter, Length, Blades, Shape) |
| − | ** | + | **Molding and Casting materials |
| − | ** | + | **[[Making a Wax Mould on the Modela]] |
====='''[[shopbot|ShopBot]]''' ===== | ====='''[[shopbot|ShopBot]]''' ===== | ||
*Safety, use, maintenance, projects (furniture, mini-sail boat, sign) | *Safety, use, maintenance, projects (furniture, mini-sail boat, sign) | ||
| − | ** | + | **Materials (Foam, Wax, Wood) |
| − | ** | + | **Tool types (Diameter, Length, Blades, Shape) |
| − | ** | + | **Molding and Casting materials in a large scale |
| − | ** | + | **Large scale surfacing |
====Shop Bot Fabrication process (2 hours)==== | ====Shop Bot Fabrication process (2 hours)==== | ||
| − | * | + | *Toolpath Generation |
| − | * | + | *Partworks 2.5D and 3D |
| − | * | + | *RhinoCam |
| − | * | + | *Material preparation and holdown |
====='''3D printing '''===== | ====='''3D printing '''===== | ||
| − | * | + | *Technoligies: Layering, SLS, FDM |
| − | * | + | *Commercial: ZCorp, Dimension, HP, Objet, Matrix, EOS |
| − | * | + | *Open Source projects: RepRap, Maker Bot, Fab at Home |
'''Evening: ''' | '''Evening: ''' | ||
| Line 152: | Line 152: | ||
====Morning > Lab Managment and administration (2 hours)==== | ====Morning > Lab Managment and administration (2 hours)==== | ||
| − | * | + | *Inventory |
| − | * | + | *Lab IT and Networking: Epilog, print drivers, LAN |
| − | * | + | *Machine maintenance |
| − | * | + | *Safety |
| − | * | + | *Machine reservation system |
| − | * | + | *Web managment tools |
| − | * | + | *Bussiness models |
| − | * | + | *Material managment (recycling, classifying) |
====Afternoon > ELECTRONICS==== | ====Afternoon > ELECTRONICS==== | ||
| − | * | + | *Design and Production Hello this is my desktop |
| − | * | + | *Programming |
'''Design software: ''' | '''Design software: ''' | ||
| − | * | + | *cad.py (pretty tough for a couple of hours!!!!) |
| − | * | + | *Eagle |
'''How to make a Hello World circuit (2 hours)''' | '''How to make a Hello World circuit (2 hours)''' | ||
| − | * | + | *CAD.py process (Feeds, Speeds, Resolution) |
| − | * | + | *Setting up the Modela (Calibration, Copper board setup) |
| − | * | + | *Tools (Milling and cutting) |
| − | * | + | *Soldering |
'''Programming: ''' | '''Programming: ''' | ||
*How to program a Hello World circuit (2 hours) | *How to program a Hello World circuit (2 hours) | ||
| − | * | + | *Assembler language |
| − | * | + | *C Programming |
| − | * | + | *Microcontroller language: .Hex files. |
| − | * | + | *Programming Cable Making (FABISP?) |
| − | * | + | *Avrdude |
'''Evening:''' | '''Evening:''' | ||
| Line 194: | Line 194: | ||
====Finishing Electronics design, production and programming==== | ====Finishing Electronics design, production and programming==== | ||
| − | * | + | *Programming cables |
| − | * | + | *Customized hello board |
| Line 202: | Line 202: | ||
====Final project integration==== | ====Final project integration==== | ||
| − | * | + | *A final project to be defined with the integration of different fabrication methods and electronics |
==== Online Final Project Presentation==== | ==== Online Final Project Presentation==== | ||
*5 min for participant to explain and show their projects (2-3 hours) | *5 min for participant to explain and show their projects (2-3 hours) | ||
Latest revision as of 05:46, 15 January 2022
Boot Camp January 2011 will be held 10th of January until 14th of January 2011.
One week crash course in fab lab tools and processes by the gurus of the fab lab network. For new fab lab managers, teachers, and people who want a fast training course.
The Boot Camp is a short duration workshop on Fab Lab management, processes and project development. The goal of Boot Camps is to offer short term training for future Lab Managers, fabricators and creators around the world. The Boot Camp is developed by the Fab Labs in the worldwide network, provided with equipment and tutors dedicated (almost) 24/7 for an intense workshop on Digital Fabrication. Bandar Poker Online | Agen BandarQQ
Contents
Participating labs:
- AS220 Fab Lab in Providence, Rhode Island, USA (contact Shawn Wallave / shawn [at] AS220 [dot] org)
- Lorain County Community College Fab Lab in Elyria, Ohio, USA (contact Scott Zitek / rzitek [at] lorainccc [dot] edu)
- Barcelona Fab Lab in Barcelona, Spain (contact Tomas Diez / tomasdiez [at] iaac [dot] net)
- Solvik Gard Fab Lab in Lyngen, Norway (contact Haakon or Jorgen Karlsen, jorgen [at] fablab [dot] no , haakon [at] fablab [dot] no)
- Vestmannaeyjar Fab Lab in Iceland (contact Frosti Gíslason, frosti [at] nmi [dot] is )
- Amsterdam Fab Lab in The Netherlands (contact Alex Schaub alex [at] waag [dot] org )
Participants
Participants in Vestmannaeyjar
- Frosti Gíslason, Fab Lab Vestmannaeyjar, Iceland
- Valur Valsson, Fab Lab Sauðárkrókur, Iceland
- Ómar Kristófersson, Fab Lab Akranes, Iceland
- Jónatan G. Jónsson, Grunnskóli Vestmannaeyja, Iceland
- Helena Jónsdóttir,Fab Lab Vestmannaeyjar, Iceland
- Ólafur Einar Lárusson, Grunnskóli Vestmannaeyja, Iceland
- Gísli Jóhannes Óskarsson, Grunnskóli Vestmannaeyja, Iceland
Participants in Lorain County
- Scott Zitek, Fab Lab LCCC
- Kayleen Adams, Fab Lab LCCC
- Noah Rasor, Fab Lab LCCC
- Gwen Johnson, BKBA
- Thomas Drake, BKBA
- Natalie Anderson-Place
- Salvator DeSanto
- Susan Matous
- Joshua Best
- Blair Evans, Insite-Focus
- John Willis, Lake Michigan College
Participants in Barcelona
- Nuria Robles, Leon
- Gustavo Valera, Madrid
- Ruben Ferrero, Leon
- Steijn de Mil, Brussels
- Daniel Pietrosemoli, Madrid
- Bernat Cuni, Barcelona
- Santiago Ferris, Valencia
Participants in Providence
t.b.e.
Schedule
Day 1 Monday
A day of 2D Design & Fabrication plus documentation (WordPress/Wiki) Group: 09:00 Boston time Neil Gershenfeld over Polycom. Introduction Documentation wiki Mercurial
2D design and fabrication
2D DESIGN TOOLS (1 hour)
Design software for 2D:
- Inkscape
- Openoffice
- Corel Draw
- illustrator
2D FABRICATION TOOLS (3 hours)
CNC Cutting:
Laser:
- Safety, use, maintenance , projects (2D projects)
- Materials (Wood, Acrylic, Textiles, Organic Source
- Nesting and saving material
- Press-fit
- From 2D to 3D and viceversa workflow (DEMO on waffle structures)
- Raster images and bitmaps
ShopBot
(Introduction in 2D cutting use): Safety, use, maintenance, projects (2D projects).
- Materials (Wood, Aluminum, Composites, Acrylic)
- Tool types (Diameter, Length, Blades, Shape)
- Nesting and Holdown
Vinyl Cutter:
- Safety, use, maintenance, projects (Tshirt, flex circuit or antenna, signs)
Documentation
How to use the wiki
Also you can try the Mercurial
Assignment:
- To develop a design using a 2D Design software (Could be out of proposed software), fabricate it with the Laser Cutter and document it on Boot Camp Site.
Day 2 Tuesday
A day of 3D design, molding and casting, (xtra 3D printing technology for those who have that capability)
3D DESIGN TOOLS (3 hours)
3D FABRICATION TOOLS (3 hours)
Modela:
- Safety, use, maintenance, projects (molding and casting, circuits, 2D etching)
- Materials
- Tool types (Diameter, Length, Blades, Shape)
- Molding and Casting materials
- Making a Wax Mould on the Modela
ShopBot
- Safety, use, maintenance, projects (furniture, mini-sail boat, sign)
- Materials (Foam, Wax, Wood)
- Tool types (Diameter, Length, Blades, Shape)
- Molding and Casting materials in a large scale
- Large scale surfacing
Shop Bot Fabrication process (2 hours)
- Toolpath Generation
- Partworks 2.5D and 3D
- RhinoCam
- Material preparation and holdown
3D printing
- Technoligies: Layering, SLS, FDM
- Commercial: ZCorp, Dimension, HP, Objet, Matrix, EOS
- Open Source projects: RepRap, Maker Bot, Fab at Home
Evening:
- Modela and ShopBot projects continued
Assignment:
- Design and fabricate a mold in a small scale
Day 3 Wednesday
Electronics and overall lab considerations (management, business, networking, IT, etc.) Group: Shawn Wallace electronics introduction: Time: 09:00 Boston time
Morning Europe time: Lab management, Tomas and Frosti, lab management and administration
Morning > Lab Managment and administration (2 hours)
- Inventory
- Lab IT and Networking: Epilog, print drivers, LAN
- Machine maintenance
- Safety
- Machine reservation system
- Web managment tools
- Bussiness models
- Material managment (recycling, classifying)
Afternoon > ELECTRONICS
- Design and Production Hello this is my desktop
- Programming
Design software:
- cad.py (pretty tough for a couple of hours!!!!)
- Eagle
How to make a Hello World circuit (2 hours)
- CAD.py process (Feeds, Speeds, Resolution)
- Setting up the Modela (Calibration, Copper board setup)
- Tools (Milling and cutting)
- Soldering
Programming:
- How to program a Hello World circuit (2 hours)
- Assembler language
- C Programming
- Microcontroller language: .Hex files.
- Programming Cable Making (FABISP?)
- Avrdude
Evening:
- electronics projects continued
Assignment
- Modify, fabricate and program your own hello board
Day 4 Thursday
Electronics continues and integrated final project work (something like a music box)
Finishing Electronics design, production and programming
- Programming cables
- Customized hello board
Day 5 Friday
Group session at 11.00 Boston time: Presentation and documentation
Final project integration
- A final project to be defined with the integration of different fabrication methods and electronics
Online Final Project Presentation
- 5 min for participant to explain and show their projects (2-3 hours)
Pages in category "Boot Camp"
The following 4 pages are in this category, out of 4 total.
